The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
| Weight: | 300 g |
|---|---|
| Material: | plastic, aluminum |
Thunder B can be attached to tactical vest or jacket. Its color and shape are very similar to a real grenade used by military force. Its handling, operation and function are also similar to the original one. The more realistic of the bomb, the more fun you will have. Since thunder B does not contain any gun powders, which means you don't have to worry about the fire harm when it blew up. These insure the safety of the user. However, you still have to beware of its deafening "BANG" which may surprise you. Thunder B create noise level over 130db, it is the noise level of an operating pneumatic drill or a plane flying above your head, be alert when using it. Thunder B is reusable. Simply replace the Co2 gas cylinder and the outer shell after use then you can fire again. Installation and Setup procedures are also simple and easy. Please refer to user manual for setup and installation. Thunder B is powered by disposable Co2 gas. Since it does not contains any gun powder or materials that can be burned and exploded, with its realistic shape, handling and function, it can be used in bombing demonstration during military.
DESCRIPTION: BDU jacket made of 65% polyester and 35% cotton WEIGHT (GR): 600 BRAND: Fostex
Multiblack Utility backpack made by waterproof high density Nylon material, Huge volume of capacity, able to store 2 Rifles (Sniper/Rifle), 1" molle webbing throughout the backpack, Extendable Gun Pouch is able to store up to 46"(~120cm) long rifle gun.
High-quality tappet plate for V2 gearbox. This material can withstand much more than plastic or ABS. It is flexible and resistant to impact. The installation of this component ensures reliable operation of the switch, the type of fire. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember...
Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9]
Airsoft half face Protective MASK, Just make some new cutting to let the mask have '' 3D '' outlook, Adjustable & Elastic Belt Strap Weight:235 gMaterial: nylon 600D, steelColor: Multicamo
Adapter allows to mount the silencer to the sniper rifle CM.701, CM.702, CM.700, TM VSR-10, JG BAR-10. It have 14 mm counterclockwise thread.
Set shirt and pants. Ideal for airsoft and paintball enthusiasts or fishing and hunting. ACU uniform set consists of trousers and a blouse in a classic, comfortable cut that is ideal for any kind of combat and outdoor activity. The blouse and trousers alike were sewn from durable Polycotton Rip-Stop material and are equipped with a multitude of pockets.
The innovative formula Works at low temperatures (up to 5°C) Increased amount of silicone oil Weight: 515g Manufacturer: Smart Gas™ PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Insert this King Arms Display Stand into your beloved AEG, and enjoy and the nice piece of metal you have. The Stand is good for any AEG which able to take Marui M14 series magazine. Magazine Style : M14 Color : Black Material : Plactic
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Rules that prevent against magazine failure: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * REMEMBER if magazine is stored, it MUST be empty, * REMEMBER to regularly oil the magazine with silicon oil. * Gun not included!
Airsoft High quality EOTech QD FTS, 3x magnification scope, Tactical design, Made by aluminum & rubber material. Full metal flip. Hybrid Sight.
PBS-3 Suppressor for AK (14mm CCW). A great AK-47 style airsoft suppressor to give your gun that silencer look. Works on all 14mm counter clockwise threaded guns. Perfectly matched for the AK-47! *Please note: this is considered a barrel extension and not a suppressor. It's a mock suppressor for looks only. This will not silence or decrease the sound of...
Sniper boots designed for professionals. These boots are fine to use during heavy duty, outdoor activities and airsoft. Made of 75% leather and 25% nylon. Features: Lining of breathable KBTex Reinforced nose Removable insole Fully padded collar Anti-slip and oil-resistant sole Thinsulate lining
Very well made holster designed for pistol replicas. It is designed for safe and easy pistol handling. After pistol is locked up trigger is fully hidden so there is no possibility to fire. The safety lock gives possibility to single-motion draw and greater protection against attempted weapon takeaways. Holster is designed for right handed users. Weight:...
KJW M9 Series Spare Magazine, 25 Rounds Magazine, M9 Series Airsoft GBB Pistol AND M9A1. Full metal Magazine is sell without CO2 charge (photo is made for information)
| Weight: | 300 g |
|---|---|
| Material: | plastic, aluminum |
![M4 CM.513 [CYMA] AEG tan](https://airsoftguns.ie/17838-home_default/m4-cm513-cyma-aeg-tan.jpg)
