The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
This magazine is dedicated to L96 snipers replica. Suitable for MB01, MB04, MB05, MB08, MB01 / MB08.
Weight: 150 g
Magazine model: low-cap
Magazine capacity: 22 BBs
Material: metal, plastic
Color: black
HFC magazine for: *HG-192 *HG-194 *HG-199 Presented magazine can be powered only by CO2 capsule. Weight: 280 g Magazine capacity: 23 BBs Material: aluminum Color: black
Set shirt and pants. Ideal for airsoft and paintball enthusiasts or fishing and hunting. ACU uniform set consists of trousers and a blouse in a classic, comfortable cut that is ideal for any kind of combat and outdoor activity. The blouse and trousers alike were sewn from durable Polycotton Rip-Stop material and are equipped with a multitude of pockets.
Magazine pouch can hold 7.62/.308 style magazines (HK417/G3/SR25/M14/AK47/FAL/SCAR-H/SSR) and 5.56/.223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
1:1 Ratio Airsoft Replica of Real Steel, Full Metal Construction except the ABS texture Grip, Gas Operated Toggle Action function works like a real one, Toggle jump back & upward for each shot.
CM.041 SD6 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal...
H.M.G. PARA Machinegun replica Classic infantry support machinegun modified for light inf. or paratroopers, lightweight and first of all very mobile for it”s category – thanks to which it”s easier to handle and carry in comparison to his standard issue cousins. The popular and approved by the community design will prevail in every situation. This replica...
Charger Specification: Input Voltage: 100-240V (AC)Charging Voltage: 3A maxMax Charging Rate: 25WCharger Type: LiPo/LiFe/NiMHLiPo/LiFe: 25/35NiMH: 1-85Balancing Current: 200 mAh NOTICE! Charges are covered only by starting warranty.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts. Weight: 1150 g Material: 1000D polyester Length: 300 mm Camouflage:...
Weight: 10 g Length: 34 mm Accumulator voltage: 3 V Diameter: 16 mm WARNING! Risk of fire and burns. Do not recharge, disassemble, heat above 100C or incinerate. Do not mix fresh batteries with used Lithium Batteries or other batteries types.
A classic and well-known Baofeng UV-5RA radio is a so-called dual band, which means a radio that operates in two bands - VHF and UHF. However, dual band is not the only thing that this device has to offer. Baofeng UV-5RA model many other elements have been doubled making it a truly universal device for radio communication over air as well as land and sea....
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts. Weight: 1150 g Material: 1000D polyester Length: 300 mm Camouflage:...
This steel spring guide bearing for V2 gearboxes is a great alternative if you are is damaged or you want to tune up the replica. It will provide proper spring operations. Warning! This spring guide does not match CYMA replicas in which the V2 gearbox is installed. All Cymy replicas are equipped with a V3 spring guide, both gearbox version V3 and V2....
Element Peltor Type PTT Device For Motorola TALKABOUT Single Pin (FRS/GMRS), Fit military standard version plug, Large Push-to-Talk Button, Metal Clip on the back for carrying on vest/strap.
- Full Metal Constructed - Red / Green Illuminated Dot, - 5 Levels Dot Brightness Control
LITEBUCK Molle System Strobe LED Light (Orange)- LITEBUCK is high performance strobe light system- IPX 7 waterproof constructed and 30 meters height shockproof- High power LED can be used for close distance lighting purpose- Suit for LITEBUCK Strobe Light series Products- For Exchange Light Color- 1x Orange Color LED
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
This magazine is dedicated to L96 snipers replica. Suitable for MB01, MB04, MB05, MB08, MB01 / MB08.
Weight: 150 g
Magazine model: low-cap
Magazine capacity: 22 BBs
Material: metal, plastic
Color: black
