The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Weight: 100g
Magazine capacity: 450 BBs
Material: ABS
Rules that prevent against magazine failure:
* before first usage, magazine *SHOULD* be oiled with silicon oil for better working,
* *REMEMBER* if magazine is stored, it *MUST* be empty,
* *REMEMBER* to regularly oil the magazine with silicon oil.
Dimensions 24x4.5x4cm.
Magazine has only mode AUTO (non-stop spring clocking).NOTE! FIt to: P&J, CM, Boyi, APS and ICS replicas Weight: 350 g
CYMA 2500rd Sheet Steel Electric Drum Magazine Airsoft -- Full Metal Construction-- 2500 Rounds Loading Capacity-- For AK Series Airsoft Electric Gun AEG Rifle (C.38)- Operated by 3 x AAA Batteries (Not Included)
Made of: metal Capacity: 500 BBs Weight: 300 g Producer: JG
Polymer construction of hi-cap magazine for 380 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, Arcturus, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard.
Hi-Cap 350 BB M4/M16 Magazine Gun suitable - Tokyo Marui, ICS, G&P, JG & D-Boys M-Series Airsoft AEG, Capacity - 400 rounds Bullet type - 6mm plastic bullet, Constructed of FULL METAL housing that is strong to drop on the floor.
Gun suitable - Tokyo Marui, ICS, G&P, JG & D-Boys M-Series Airsoft AEG, Capacity - 400 rounds Bullet type - 6mm plastic bullet, Constructed of FULL METAL housing that is strong to drop on the floor.
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
Polymer construction of hi-cap magazine for 450 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, Arcturus, A&K, it's also compatible with AEG in Tokyo Marui standard. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: ·...
The Flash Magazine makes using a Hi-Cap magazine quickly and easier. On a traditional high capacity magazine you must wind a wheel on the bottom on the magazine to feed the BBs into the loading tube. Flash magazine uses a simple string that when pulled winds the magazine with only a few pulls.
Rules that prevent against magazine failure: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * REMEMBER if magazine is stored, it MUST be empty, * REMEMBER to regularly oil the magazine with silicon oil. * Gun not included!
Polymer construction of hi-cap magazine for 300 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard
CYMA 1100rd Auto Electric Winding Dual Magazine for AK (c.14)
Material: Steel + polymer Type: Hi-Cap Capacity: 300 BBs Weight: 210 g Color: Tan
The magazine fits replicas of many manufacturers, but we have realistically tested and confirmed the efficient operation of the models: CM.028 A, CM.028, CM.037, CM.028 S, CM.028 C, CM.031, CM.031 B, CM.036, CM.042A, CM.040 C, CM.039U, CM .039C, CM.042B, CM.042S, CM.042, JG0510, JG0509 The need for a delicate filing of the magazine hook can occur in...
Rules that prevent against magazine failure: * before first usage, magazine *SHOULD* be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil the magazine with silicon oil. Weight: 175 g Magazine capacity: 200 BBs Material: steel Fits to : CM.041B, CM.041, CM.041J, M5-071,...
Insert this King Arms Display Stand into your beloved AEG, and enjoy and the nice piece of metal you have. The Stand is good for any AEG which able to take Marui M14 series magazine. Magazine Style : M14 Color : Black Material : Plactic
Weight: 100g
Magazine capacity: 450 BBs
Material: ABS
