The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
DESCRIPTION:
BDU jacket made of 65% polyester and 35% cotton
WEIGHT (GR): 600
BRAND: Fostex
|
Tactical Shirt |
Small |
Medium |
Large |
X-Large |
|
Chest Circumference |
- |
- |
||
|
Sleeve Length |
- |
- |
||
|
Length |
- |
- |
CM007 assault rifle replica - black The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped...
The replica was made of high-quality metal and polymer. Metal parts include the slide of the replica while the frame was made of polymer. The top of the slide features comfortable iron sights with a fiber-optic front sight. The magazine itself is a two-row kind, which allows it to store up to 24 BBs. An additional advantage is a hammer release, which...
HM0399 Polymer Stock for 416 Replicas A light, adjustable stock made of polymer, compatible with any replica equipped with a HK416 / AR15 buffer tube. The stock features a thick, rubber recoil pad and tactical sling swivels.
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
Made by high density nylon. Enhance the speed of magazine change. Keep the empty magazine for reloading later. Able to attached to any molle webbing vest, bag, duty belt or backpack. Color - MB
M1918 BAR replica magazine of S&T company, which can be found on our website. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: before first usage, magazine SHOULD be oiled with silicon oil for better working, REMEMBER, If magazine is stored, it MUST be empty, REMEMBER to regularly oil the magazine with...
Weight: 170 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Accumulator voltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Goggles with a polycarbonate visor and a frame made of resistant TPU material. NOTE: Goggles provide protection from an impact that can be caused by airsoft bbs. Although they are tested, they are not unbreakable. The manufacturer or seller is not responsible for product damage incurred in connection with the use of games in the tactical/military/ASG. The...
28 rounds capacity double-stack magazine with a base pad for fast, smooth, positive reload. NOTE! Magazine dedicated to the R5XX and R6XX (Hi-Capa / 2011) series replicas by Army Armament. Also fits Baba Yaga - SRC. We recommend replacing the nozzle for CO2 blue nozzle. Weight: 355 g Material: metal
Igniter for Thunder B sound grenades for CO2 capsules. Weight: 160 g Material: metal, steel, polymer
Refreshed version of the popular CYMA electric pistols, produced under **Heckler & Koch (HK) license** granted by **Umarex**. The replica retains the classic AEP appearance while receiving significant internal upgrades that increase reliability and performance. In addition, it is fitted with a **built-in MOSFET system**, improving electronics...
Product Code: NMOP003 Product Brand: Systema Replace Original Motor Spring for Marui Airsoft AEG SUITABLE FOR SYSTEMA MOTOR ONLY
The elements are made of stainless steel, thanks to which it ensures trouble-free use. Fits replicas equipped with a metal trigger unit. Fits models:Well L96 / MB01 / 04/05/08/14 Weight: 20 g Material: stainless steel Quantity in package: 1 pcs
Provides optimal comfort and some of the most natural grip positioning, prevents fatigue, increases speed and long term accuracy. Weight: 75 g Color: dark earth Material: polymer Length: 130 mm Manufacturer: MP
The sling also has a bungee feature to both ends of the sling made from top quality dual rubber belts inside the sling. The sling is adjustable for hunters and guns of all sizes. The sling is suitable for most types of rifles.
DESCRIPTION:
BDU jacket made of 65% polyester and 35% cotton
WEIGHT (GR): 600
BRAND: Fostex
![M4 CM.007 Full Metal [CYMA]...](https://airsoftguns.ie/14678-home_default/m4-cm007-full-metal-cyma-ris-carbine-aeg-rifle.jpg)
