The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Quick detachable bipod with adjustable leg length is compatible with standard RIS rail. Also it can be attached to sling attachment in some replicas (look photos).
Features:
~ Contructed by aircraft aluminum alloy(6 Inch to 9 Inch).
~ Ultra Light Weight.
~ Automically spring extended with quick 6 position adjustments with 15mm increment.
~ Leg extend by release the lock on leg.
~ Direct attach to standard rifle Q.D. Stud.
~ Folds up under barrel when not using.
~ Improves accuracy and shooting range.
~ Comes with a Bipod Adapter for 20mm rail system.
|
Specifications: |
|
|
~ Length : |
6” – 9” |
|
~ Weight : |
230g(weight without bipod adapter) |
|
~ Color : |
Anodized Matte Black |
|
~ Built Material : |
Aircraft Grade Aluminum Alloy |
Package Includes:
~ 1 x 6 Position Tactical Bench Rest Rifle Bipod 6"-9" #RH6-2
~ 1 x Screw for height adjustment
~ 1 x Bipod Adapter for 20mm Rail System
NOTE! Bipod is quick detachable and clamp to the sling swivel stud already installed in most rifles.
Fits 20 mm Rails Materials : Reinforced Fibre Nylon Durable construction Quick release button to eject bipod
Theta Optics equipment is a quarantee of high quality for a reasonable price. Closed in a durable metal housing, transparent optics with a cross sight of mid-dot type and 4X magnification. Thanks to the backlight of the crosshair (red) you can use the scope successfully either during the day and night. The power supply is provided by the CR1620 battery....
Designed for use on SMGs and carbines to provide faster target acquisition and accuracy. The best for two eyes open shooting to give the operator greater zone control. It has 10 levels of brightness adjustment of the red aiming point. Fits all standard Picatinny/Weaver rails. Powered by a single CR2032 battery (not inluded). The sight comes from the...
Scope made from aluminum with red aiming point illumination. It have eleven position of brightness regulation.
This protector will protect your Scope - Red Dot from damage.
Airsoft High quality EOTech QD FTS, 3x magnification scope, Tactical design, Made by aluminum & rubber material. Full metal flip. Hybrid Sight.
Metal Constructed Killflash for ACOG scope. Easy to install with included elastic band. Protect your eyes blind from optical probe "OP" Flashlight (strong lighting). Able to protect the front lens of your ACOG scope.
Airsoft Scope 3-9x50EG with high mounting rings Material: ABS, aluminum Length: 315 mm Diameter of enter lens: 35 mm Diameter of exit lens: 50 mm Aiming instrument: cross Optic: glassWeight: 490 g
The RedFiber scope from Theta Optics ™ is a guarantee of high quality at a reasonable price. Closed in a durable, metal housing, transparent optics with a cross hairs and x4 magnification. Thanks to the back light of the cross (red) the telescope can be successfully used in dynamically changing lighting. Highlight the optical fiber. A cross can be...
Technical details: • Zoom: 2.5-10x • Diameter of exit lens: 40mm • Diameter of enter lens: 20mm • Length: 210mm • Aiming instrument: lightened cross (red/green) • Aiming cross regulation: vertical and horizontal • Optic: glass * Laser: red * Mount: one piece mount for 22mm rail
Bi-pod for the MB06D Airsoft Gun. Foldable bi-pod with adjustable legs for different heights.
Made by high Plastomer. Avoid damaging the holographic sight. Perfect for outdoor war game activities. Material: Plastomer,
1.5X ZF-41 Scope with mount for Kar98 replicas Optical scope dedicated to the historical replica of the Kar98 rifle. The scope is made entirely of metal, with the exception of the covers for the adjustment knobs and the tightened viewfinder. The telescope has a dedicated assembly and a set of glass covers.
A scope by Theta Optics™ 3-9*40 EG Scope is a guarantee of high quality and reasonable price. Enclosed in a durable, metal casing, vivid optics with a Mil-Dot reticle as well as a fixed magnification. The reticle can be smoothly adjusted both vertically and horizontally. The product is attached on a standard RIS 22 mm rail. Features an adjustable...
Tactical Quick Release 8-10 inch Clamp-on Bipod- Material: steel- Color: Black- FIT for barel AEG
Zoom: 3 - 9x * Diameter of exit lens: 40 mm* Diameter of enter lens: 35 mm* Length: 285 mm* Aiming instrument: lightened aiming net with cross* Aiming cross regulation: vertical and horizontal* Optic: glassSet include: scope 3-9x40E, lens cover.
Quick detachable bipod with adjustable leg length is compatible with standard RIS rail. Also it can be attached to sling attachment in some replicas (look photos).
