The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The replica is surprisingly well and carefully made. Similarly to the original, the mechanism of the removable barrel is functioning. The replica is equipped with a folding three-position bipod (bipod) with a maximum length of 38 cm. The whole structure is made of metal, thanks to which the replica weighs together with a box magazine which is in the set of more than 6 kg.
The box magazine holds 2400 bb and is controlled by two AA batteries. The replica is also suitable for standard hi cap / low cap magazines, which in the same way as the original is interchangeable with all M4 / M15M16 series rifles and with magazines of other manufacturers operating on this standard of magazines.
Please Note!!!
Estimated delivery time is 10-14 working days!
The replica is surprisingly well and carefully made. Similarly to the original, the mechanism of the removable barrel is functioning. The replica is equipped with a folding three-position bipod (bipod) with a maximum length of 38 cm. The whole structure is made of metal, thanks to which the replica weighs together with a box magazine which is in the set of more than 6 kg.
The box magazine holds 2400 bb and is controlled by two AA batteries. The replica is also suitable for standard hi cap / low cap magazines, which in the same way as the original is interchangeable with all M4 / M15M16 series rifles and with magazines of other manufacturers operating on this standard of magazines.
The mechanism of the replica is a decent gearbox which in some places has a thickness of 5 mm.
In this model, the battery fits inside the stock.
The important thing is that the parts and accessories of other manufacturers are fully compatible with this model, which is helpfull for enhancing the replica and improving performance.
The hop-up chamber is all metal, the hop-up adjustment is done by means of a ring.
In the set we get:
* replica covered by a 12 month warranty
* box magazine with a capacity of 2400 balls
Weight: 6400 g
Magazine model: ABS
Bearings type: steel ball-bearing
Gearbox version: dedicated
Magazine model: box
Accumulator type: NiMH
Muzzle velocity: ~328fps
Accumulator type: hi-cap
Accumulator included in set: NO
Diameter of Internal barrel: 6,03 mm
Magazine capacity: 2400 BBs
Accumulator capacitance: 1200 mAh
Material: aluminum, polymer, steel
Length: 1050 mm
Accumulator voltage: 9,6 V
Muzzle energy: ~1J
Length of internal barrel: 510 mm
Fire mode: auto
NOTE! Please note that Battery and Charger are not included. Need to buy it separately.
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
H.M.G. PARA Machinegun replica Classic infantry support machinegun modified for light inf. or paratroopers, lightweight and first of all very mobile for it”s category – thanks to which it”s easier to handle and carry in comparison to his standard issue cousins. The popular and approved by the community design will prevail in every situation. This replica...
The replica is surprisingly well and carefully made. Similarly to the original, the mechanism of the removable barrel is functioning. The replica is equipped with a folding three-position bipod (bipod) with a maximum length of 38 cm. The whole structure is made of metal, thanks to which the replica weighs together with a box magazine which is in the set...
Designed as a replacement for the problem-ridden Type 11 machine gun, the Japanese Type 96 provided a much-needed upgrade to the outdated hopper-fed design of the Type 11. Loosely based on the designs of captured Czech ZB vz.26 rifles, the Type 96 went into production in 1936 and served the Japanese Imperial Army until their defeat in 1945. Please...
An AEG replica of an American WWII light machine gun. The mechanism is a gearbox with a quick spring change system, steel gears mounted on 8mm ball bearings. The stock and handguard are made of high-quality real wood, and the elements such as barrel, bipod, receiver, carry handle, trigger guard, magazine release catch and sights are made of metal alloys....
042 is a replica of a German machine gun (Maschinengewehr 42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft sight....
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
The replica is surprisingly well and carefully made. Similarly to the original, the mechanism of the removable barrel is functioning. The replica is equipped with a folding three-position bipod (bipod) with a maximum length of 38 cm. The whole structure is made of metal, thanks to which the replica weighs together with a box magazine which is in the set of more than 6 kg.
The box magazine holds 2400 bb and is controlled by two AA batteries. The replica is also suitable for standard hi cap / low cap magazines, which in the same way as the original is interchangeable with all M4 / M15M16 series rifles and with magazines of other manufacturers operating on this standard of magazines.
Please Note!!!
Estimated delivery time is 10-14 working days!
