The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Gun bag made of durable 600D nylon and padded by foam. It has a main compartment with a length of 100cm, 4 internal pouches for magazines, and a MOLLE laser cut panel on the outside.
Weight: 780 g
Material: nylon 600D
Camouflage: olive
Length mm: 1000
Height mm: 280
Width milimeters: 80
Head-up, both eyes open aiming. Heavy duty red and green dot sight for airsoft handguns, rifles and shotguns. Holographic Multi 4 Reticle Dot Sight
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft.
AGM L96 Series Low-Cap Magazine (MP002 - 22 Rounds) Injection molded polymer construction High tension steel spring ensures reliable feeding 22 round capacity Compatibility: AGM/Matrix/JG MP002 Type 96 Airsoft sniper rifles Capacity: 22 rounds Materials: Injection molded polymer Manufacturer: AGM
Weight: 570 g Material: plastic
Made of 200 g/m2 cardboard, these standard-sized 14 x 14 cm recreational target, perfect for pneumatic pistol shooting.Set: 100 pcs
Plate Carrier Harnes - camoflage Olive - OD (green), All pouches fixed with molle system. None of them is permanently attached to the vest and may be changed if necessary.
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Precisely made 0,25g pellets that glow in the dark. After illumination there is possibility to track the pellet even in complete darkness. This ammunition was made by the well-known Taiwanese company BLS. These BB are very well made, we recommend them to each player.
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
The TYP 38 replica is a great choice for those looking for a realistic, historical airsoft rifle. Its solid construction, upgrade potential, and attention to detail make it not only a fun gun to use but also a valuable collector's item. The TYP 38 replica is a faithful reproduction of the historic Japanese Army rifle, produced by S&T Armament (Smart...
DESCRIPTION A Rifle of the well-known Belgian PDW FN Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates. Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and anti-terrorist groups in...
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
LITEBUCK Molle System Strobe LED Light (Blue)- LITEBUCK is high performance strobe light system- IPX 7 waterproof constructed and 30 meters height shockproof- High power LED can be used for close distance lighting purpose- Suit for LITEBUCK Strobe Light series Products- For Exchange Light Color- 1x Blue Color LED
Gun bag made of durable 600D nylon and padded by foam. It has a main compartment with a length of 100cm, 4 internal pouches for magazines, and a MOLLE laser cut panel on the outside.
Weight: 780 g
Material: nylon 600D
Camouflage: olive
Length mm: 1000
Height mm: 280
Width milimeters: 80
![AK-74 CM.040 [CYMA] Full...](https://airsoftguns.ie/17625-home_default/ak-74-cm040-cyma-full-metal-steel-and-aluminium.jpg)
