The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
ASTER Module - It includes ASTER with BASIC firmware edition.
The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always an option to upgrade firmware from BASIC to ADVANCED or EXPERT.
NOTICE! In order to configure ASTER via GCS app, you need the USB-Link or Blu-Link*, which is not included in this kit. EXPERT firmware edition was released in Fall 2019.
ASTER V2 is a younger brother of well-known TITAN V2. This world's first 4th generation AEG Control System is destined for V2 gearboxes (including stock, low- and mid-tuned) and even for high-tuned guns (in case of EXPERT firmware). It was designed to achieve maximum reliability at attractive price and hence it has extremely profitable price-performance ratio. Transform your AEG by replacing trigger contacts with computerized controller equipped with innovative optical sensors. Gain a unique tactical advantage thanks to the extremely fast trigger response and lots of other useful functions. ASTER's smart fuse protects your AEG’s battery, motor and the controller, even in case of reverse battery connection. This feature, along with the optical sensors, makes ASTER the most durable drop-in unit on the market. You choose how to configure ASTER - simply via trigger or through USB-Link / Blu-Link and our advanced GCS app. To enjoy full potential of ASTER, you can upgrade its firmware to ADVANCED or EXPERT.
*Blu-Link is future GATE Bluetooth® adapter. It will be compatible with future GATE iOS app.
|
 |
|
ASTER and GATE Control Station give you total control of your AEG. The GCS offers you the option to:
|
 |
|
ASTER has optical sensors for detecting gear cam, trigger and selector position. With the GCS app, you can easly calibrate, test and adjust these sensors. |
|
The trigger sensor offers you even 250 possible sensitivity settings. You do not have to disassemble your AEG. Just use GCS app to adjust the trigger to your preferences and level of skills. You can even activate 2-stage trigger and set two different trigger sensitivities. Pulling the trigger slightly produces Semi or Burst fire and pulling the trigger further produces Burst, Burst / Auto or Auto fire. The 1.5 gen. proximity trigger sensor offers the following sensitivity ranges, depending on trigger construction:
If you want to enjoy 'hair trigger' function in ASTER, equip it with GATE Quantum Trigger.
|
|
The selector sensor gives you an option for fine calibration of selector switching point. Please note: Trigger sensitivity and selector switching point cannot be set while programming via trigger. |
 |
|
Blu-Link allows for wireless management of your GATE ETU via GCS app for iOS, Android and later this year, also Windows / macOS. You can use iPhone, Android smartphone or a computer to control ASTER or TITAN. Blu-Link perfectly expands GATE ETUs possibilities by equipping them with Bluetooth® 5.0 technology. |
|
 |
|
This programming mode allows you to configure basic functions of ASTER only with trigger and fire selector. During programming, functions and options are indicated by corresponding LED colors and vibrations. The following ASTER options can be programmed via trigger:
|
 |
Please note: to connect ETU to GCS you need USB-Link or Blu-Link |
The table below contains functional comparison of settings configured via trigger and across firmware editions. The comparison applies to ASTER possibilities and TITAN functionality after GBU firmware update. You need to purchase USB-Link or Blu-Link to connect ASTER with GATE Control Station.
Please note: Gearbox and smartphone are not included.
Please note that material and colour of insulation washers included in the kit may differ between different batches.
Warning!
GATE does not guarantee the compatibility of mosfets and ETUs such as TITAN or ASTER with brushless motors. Connection of a brushless motor can cause immediate damage to the device, motor and battery, that is not covered by the warranty and can lead to a fire.
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replacement of Standard Magazine for Thompson M1A1 AEG . Plastic 6mm Bb's only . Capacity: 60 Rounds . Weight(Gram): 100
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
Very well-made goggle with polycarbonate lenses having a thickness of 2.2 mm and hard rubber frame, combining both safety, style and comfort. Dedicated for mounting on a helmet with ARC rails. Weight: 75 g Material: ABS Color: olive Camouflage: olive Protective visor: plexiglass Color of glasses: transparent
Set shirt and pants. Ideal for airsoft and paintball enthusiasts or fishing and hunting. ACU uniform set consists of trousers and a blouse in a classic, comfortable cut that is ideal for any kind of combat and outdoor activity. The blouse and trousers alike were sewn from durable Polycotton Rip-Stop material and are equipped with a multitude of pockets.
Spare hydration bladder Capacity: 2L
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Case Qty: 8 pcs Weight: 1500 g Material: cordura, nylon 500D Camouflage: olive Length mm: 250 Height mm: 340
Set of side covers for the FAST type helmets; The set of the side covers ( cheek covers ) is designed to be mounted on the FAST type helmets in order to provide additional protection of the user’s face. The mount of the covers is possible after the application of the mounting rail set for the FAST type helmets which is available separately. Designed for:...
Paper targets with white figure on black background. The figure is divided into sections with independent scoring. Targets are characteristic for their high quality print. Size - 50cm x 70cm
Combo magazine pouch can hold 5.56 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG) or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
Weight: 70 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
Igniter for Thunder B sound grenades for CO2 capsules. Weight: 160 g Material: metal, steel, polymer
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
ASTER Module - It includes ASTER with BASIC firmware edition.
The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always an option to upgrade firmware from BASIC to ADVANCED or EXPERT.
