The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Styled after the famous G Series pistol the KJW-KP13C offers a custom look similar to Agency Arms and SAI without their price tags.
The KJW KP-13C co2 is the new lighter version of the KJ Works KP-13, it features a stylish pistol frame has been known for years before the introduction of the similar pistols that uses polymer body which has a textured pattern.
The rounded-shaped grip of the typical full-size KP-13C is of a comfortable and ideal shape, at least for many shooters.
The aggressive cuts on the slide help with racking the slide with efficiency.
|
Professional 0,23g BBs - 1kg (4300rds)
€11.95 |
|
Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND! |
CO2 12g capsule
€0.85 |
KP-13-C Pistol Replica
The replica was made of high-quality metal and polymer. Metal parts include the slide of the replica while the frame was made of polymer. The top of the slide features comfortable iron sights with a fiber-optic front sight.
The replica is powered by co2. The magazine itself is a two-row kind, which allows it to store up to 24 BBs. An additional advantage is a hammer release, which prevents a possible, accidental discharge.
The sidearm can be easily disassembled for maintenance and cleaning - which is an important advantage because very frequently gas replicas require a lot of attention from their owners.
Specifications:
Weight: 756g (with magazine)
Color: Black, Brass
Material: Metal, Polymer
Hop-up: Adjustable
Shooting Mode: Safety, Semi-Auto
Magazine Capacity: 24 Rounds
Bullet Type: 6mm BB
Power(Muzzle Velocity): 310 FPS (0.2g BB, co2)
Manufacturer: KJ Works
The set includes:
- replica
- magazine
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
LEFT HAND Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material:...
1.6 Steel Flash Hider A steel flash hider equipped with 14 mm CCW thread.
Magazine pouch can hold 7.62 / .308 style magazines (HK417 / G3 / SR25 / M14 / AK47 / FAL / SCAR-H / SSR) and 5.56 / .223 (G36) or many other accessories. Compatible with all MOLLE platforms. Weight: 220 g Material: 600D polyester
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: T-CONNECTORAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
Weight: 1000 g Material: 1000D polyester Color: Olive Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
A very intuitive and easy to use smartcharger by GFC Energy. Can be used to charge NiMH batteries. The charger is supplied with a cell count autodetection system.
Insert this King Arms Display Stand into your beloved AEG, and enjoy and the nice piece of metal you have. The Stand is good for any AEG which able to take Marui M14 series magazine. Magazine Style : M14 Color : Black Material : Plactic
Weight: 760 g Material: plastic, aluminum
Weight: 300 g Material: plastic, aluminum
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy. Scope and bipod NOT INCLUDED. Please Choice separately from list below
Bi-pod for the MB06D Airsoft Gun. Foldable bi-pod with adjustable legs for different heights.
Theta Optics™ Battle reflex sight is enclosed in a metal casing and powered by three AG13 batteries as well as allows to use a green or red dot during both day and night operations. The aimpoint can be smoothly regulated vertically and horizontally. It features several brightness options. Mounted on a standard 22mm RIS rail, the sight allows for rapid and...
ORDER NOW Blu-Link allows for wireless management of your GATE ETU via GCS app for iOS, Android and later this year, also Windows / macOS. You can use iPhone, Android smartphone or a computer to control ASTER or TITAN and connect them with other compatible GATE devices, such as STATUS Gun-mounted Computer. Blu-Link perfectly expands GATE ETUs...
Styled after the famous G Series pistol the KJW-KP13C offers a custom look similar to Agency Arms and SAI without their price tags.
The KJW KP-13C co2 is the new lighter version of the KJ Works KP-13, it features a stylish pistol frame has been known for years before the introduction of the similar pistols that uses polymer body which has a textured pattern.
The rounded-shaped grip of the typical full-size KP-13C is of a comfortable and ideal shape, at least for many shooters.
The aggressive cuts on the slide help with racking the slide with efficiency.
![M4 AEG WITH KEYMOD CM.515 Tan [CYMA]](https://airsoftguns.ie/17296-home_default/m4-aeg-with-keymod-cm515-tan-cyma-.jpg)
