The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Combat knife 7inch made of 100% metal
With a nylon handle
Nylon cover included
A replica of DL 60 SOCOM pistol, manufactured by Danish company ASG. Comes with a silencer 195 mm long. It is equipped with safety lock and fixed HopUp system, which significantly improves the accuracy and range of replica. Replica is made of high quality ABS composite. Magazine holds 27 rounds. Under the barrel is placed Picatinny rail for mounting...
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
Combo magazine pouch can hold 5.56 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG) or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Design to install on Rear retractable stock of Marui AEG. Both left & right handed compatible. Look very good with bungee rifle sling. Steel metal adaptor. NOTE: Adaptor is designed for original AEGs stock pipe
The replica is made entirely from metal, with the exception of, naturally, grip panels and a magazine base that is made from ABS. In combination with excellently operating and powerfully “kicking” blow-back, it provides increased realism as well as influences significantly the durability of the construction
This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, Arcturus, it's also compatible with AEG in Tokyo Marui standard. NOTE! This magazine requires a loading tool or Speedloader to fill it up. Mid-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first...
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Quick detachable bipod with adjustable leg length is compatible with standard RIS rail. Also it can be attached to sling attachment in some replicas (look photos).
Boonie hat provides excellent protection against sun and rain. Used during the operation in the areas of forest or desert. Weight: 130 g Material: cotton, polyester Camouflage: Multicam Black
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: tan
6,03mm steel precision inner barrell - 590 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Made of rigid nylon tactical belt, can carrier a holster or pouches.
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Patch PVC with velcro
High-quality knife with unique military design and D-Day 1994 text engraved in the wood. Cool look due carbon print & wood finished handle.Equipped with stainless steel gray coated knife blade and folding protection. The knife also has an integrated gut hook to cut ropes / wires and belts.Perfect for travel, outdoor activities and everyday...
X-ASR is the world’s first 4th generation MOSFET protected against reverse polarity. It saves space, time and money because additional regular fuse is no longer needed. Acting as an electronic guard, X-ASR improves your AEG’s safety and durability through conformal coating and self-test with 2 LEDs. Although designed for up to M120 springs, in full auto...
Combat knife 7inch made of 100% metal
With a nylon handle
Nylon cover included
![BOONIE HAT - MB [EM]](https://airsoftguns.ie/13099-home_default/boonie-hat-mb-em-.jpg)
![HK416 FULL METAL LONG [BELL]](https://airsoftguns.ie/15698-home_default/hk416-full-metal-long-bell-.jpg)
