The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Killflash for Holo Weapon Sight Series. It's designed for many models, is easy to install and most important provides protection against damage.
https://www.youtube.com/watch?v=IV58XMobgcw
Weight: 5 g
Material: polymer
Color: black
DUO PACK Silicone grease + PTFE Grease is a set of special lubricants dedicated to professional users. Silicone grease effectively protects, insulates and maintains seals and pistons. It protects against moisture and has a wide operating temperature range from -50°C to 200°C
SC-01 - black [BOYI] from Boyi is very well made replica. Material used to build this rifle is aluminum worked by CNC technology (Upper Receiver) and resistant nylon fiber (Lower Receiver, stock, pistol grip) which is used to real gun production. On attention deserve precision flip-up folding sights with full regulation. Replica is equipped with three...
Gun bag made of durable 600D nylon and padded by foam. It has a main compartment with a length of 100cm, 4 internal pouches for magazines, and a MOLLE laser cut panel on the outside. Weight: 780 g Material: nylon 600D Camouflage: black Length mm: 1000 Height mm: 280 Width milimeters: 80==
The SRC pistol features a metal frame and metal slide with strong blowback after every shot that simulates a real pistol shot. Additionally comes with accessory rail for weapon light, and threaded barrel for suppressor or tracer unit. This model is a CO2 magazine ready.
Weight: 120 g Material: 1000D polyester Color: olive Please Note!!! Shells are not included!!!
Weight: 1000 g Material: 1000D polyester Color: black Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
Magazine with a capacity of 30 BBs dedicated to [M1 Garand] replicas by PJ, AK. It does not fit the ICS replica. Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better...
Full-metal pistol according to model 1911. Heavy Weight replica thanks to full-metal design, only adds to the authenticity and excellent feeling of wearing. The weapon has a palm lock that is fully functional. The replica scale is 1: 1. Muzzle velocity is 200 Fps with 0.20g BBs with 0.12g BBs up to 250 Fps. Please note!!! Without markings, serial number...
RIS rail system and an ergonomic pistol grip replica of the AK47 assault airsoft rifle that has got all of the advantages of the base model. - V.3 gearbox Please note; Battery and charger not included!!!
Set include two RIS rails 98 mm long. Weight: 70 g Material: aluminum Length: 98 mm
Weight: 175 g Material: ABS Color: olive Protective visor: plexiglass Color of glasses: yellow, transparent, tinted
The Exhaust magazine valve dedicated to APS ACP Dual Power replicas, such as: * Spyder-C * Scorpion * Dragonfly
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined,...
Very well made holster designed for pistol replicas. It is designed for safe and easy pistol handling. After pistol is locked up trigger is fully hidden so there is no possibility to fire. The safety lock gives possibility to single-motion draw and greater protection against attempted weapon takeaways. Holster is designed for right handed users. Weight:...
Killflash for Holo Weapon Sight Series. It's designed for many models, is easy to install and most important provides protection against damage.
https://www.youtube.com/watch?v=IV58XMobgcw
Weight: 5 g
Material: polymer
Color: black
![100CM RIFLE BAG - BLACK [PJ]](https://airsoftguns.ie/19261-home_default/100cm-rifle-bag-black-pj-.jpg)
