MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Reference: VB1501000

MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V. This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged. It has a signaling LED, the red color means charging and the green color - battery is full. Thanks, microprocessors charging is fast and the...
€16.95
More MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V
In stock
R32 SANDSTORM [ARMY ARMAMENT] (TAN) R32 SANDSTORM [ARMY ARMAMENT] (TAN)

Reference: R32-2

R32 SANDSTORM [ARMY ARMAMENT] (TAN)

A long-awaited replica of ARMY ARMAMENT's 1911 Darkstorm already on sale. The aim of ARMY was to launch a product for customers who are looking for a pistol with reliable combat characteristics, long range, fly straight and hit hard, but also a beautiful appearance with made of accuracy, precision finish and durability of construction. Please note!!! Gun...
€149.95
More R32 SANDSTORM [ARMY ARMAMENT] (TAN)
In stock
BATTERY LI-PO 1500MAH 7,4V 20/40C T-CONNECTOR [8FIELDS] BATTERY LI-PO 1500MAH 7,4V 20/40C T-CONNECTOR [8FIELDS]

Reference: VL2015742TC

BATTERY LI-PO 1500MAH 7,4V 20/40C T-CONNECTOR [8FIELDS]

Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: T-CONNECTORAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
€24.95
More BATTERY LI-PO 1500MAH 7,4V 20/40C T-CONNECTOR [8FIELDS]
In stock
Out-of-Stock KJW M9 IA Elite Full Metal (CO2) KJW M9 IA Elite Full Metal (CO2)

Reference: KJW-02-005344

KJW M9 IA Elite Full Metal (CO2)

The replica is made entirely of metal. The only elements made of polymer are the pistol grip panels. The magazine can hold up to 24 BBs. The loading of the magazine is very simple thank to a round opening located on the side of the spring. The replica features a winged safety on the slide, similarly to the live firearm original. The Blow-Back system...
€159.95
More KJW M9 IA Elite Full Metal (CO2)
Out-of-Stock
All best sellers
  • Banner

    Banner left 1
THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]
  • THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]
  • THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]
  • THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]
  • THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]
  • THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]

THUNDER B SONIC GRENADE COMPLETE SET - DUMBBELL [HAKKOTSU]

TB-12D

Weight: 720 g
Material: plastic, aluminum
€64.95
Tax included
Quantity

Description

Thunder B can be attached to tactical vest or jacket. Its color and shape are very similar to a real grenade used by military force. Its handling, operation and function are also similar to the original one. The more realistic of the bomb, the more fun you will have. Since thunder B does not contain any gun powders, which means you don't have to worry about the fire harm when it blew up. These insure the safety of the user. However, you still have to beware of its deafening "BANG" which may surprise you. Thunder B create noise level over 130db, it is the noise level of an operating pneumatic drill or a plane flying above your head, be alert when using it. Thunder B is reusable. Simply replace the Co2 gas cylinder and the outer shell after use then you can fire again. Installation and Setup procedures are also simple and easy. Please refer to user manual for setup and installation. Thunder B is powered by disposable Co2 gas. Since it does not contains any gun powder or materials that can be burned and exploded, with its realistic shape, handling and function, it can be used in bombing demonstration during military.

Product Details
TB-12D
4 other products in the same category:
M-147 Bottom Receiver for M4/M16 Replicas M-147 Bottom Receiver for M4/M16 Replicas

Reference: JGG-09-029704

M-147 Bottom Receiver for M4/M16 Replicas

M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
€14.95
More M-147 Bottom Receiver for M4/M16 Replicas
In stock
JUMP PLATE CARRIER V2 (SIZE LARGE) - MT JUMP PLATE CARRIER V2 (SIZE LARGE) - MT

Reference: M51611055-1-MT

JUMP PLATE CARRIER V2 (SIZE LARGE) - MT

Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts. Weight: 1150 g Material: 1000D polyester Length: 300 mm Camouflage: MT...
€54.95
More JUMP PLATE CARRIER V2 (SIZE LARGE) - MT
In stock
Out-of-Stock M92F ST92F NON-BLOWBACK AIRSOFT GAS PISTOL - BLACK M92F ST92F NON-BLOWBACK AIRSOFT GAS PISTOL - BLACK

Reference: 11555, GG-104, GGH-9502

M92F ST92F NON-BLOWBACK AIRSOFT GAS PISTOL - BLACK

A semi-automatic gas operated version of the classic M92F. Used by many law enforcement agencies and military forces around the world, and has appeared in countless action movies. This popular replica holds 21 BB’s in the magazine and has fixed Hop-up.  Please note!!! Gun can came without markings.
€54.95
More M92F ST92F NON-BLOWBACK AIRSOFT GAS PISTOL - BLACK
Out-of-Stock

Follow us on Facebook