The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
| Weight: | 760 g |
|---|---|
| Material: | plastic, aluminum |
Thunder B can be attached to tactical vest or jacket. Its color and shape are very similar to a real grenade used by military force. Its handling, operation and function are also similar to the original one. The more realistic of the bomb, the more fun you will have. Since thunder B does not contain any gun powders, which means you don't have to worry about the fire harm when it blew up. These insure the safety of the user. However, you still have to beware of its deafening "BANG" which may surprise you. Thunder B create noise level over 130db, it is the noise level of an operating pneumatic drill or a plane flying above your head, be alert when using it. Thunder B is reusable. Simply replace the Co2 gas cylinder and the outer shell after use then you can fire again. Installation and Setup procedures are also simple and easy. Please refer to user manual for setup and installation. Thunder B is powered by disposable Co2 gas. Since it does not contains any gun powder or materials that can be burned and exploded, with its realistic shape, handling and function, it can be used in bombing demonstration during military.
Rules that prevent against magazine failure: * before first usage, magazine *SHOULD* be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil the magazine with silicon oil. Weight: 175 g Magazine capacity: 200 BBs Material: steel Fits to : CM.041B, CM.041, CM.041J, M5-071,...
Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
CM.128 is a selective-fire (semi-auto) electric non-blowback pistol. Fire-control selector switch in the form of the Safety Lever. Frame and slide made of polymer. Pistol featured with a hop up system.
Head-up, both eyes open aiming. Heavy duty red and green dot sight for airsoft handguns, rifles and shotguns. Holographic Multi 4 Reticle Dot Sight
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
Design for Bolt Action Airsoft Sniper Rifle VSR-10 & G-Spec, Steel Construction, Reinforced trigger sear is required part upgrade in order to handle a more powerful spring, Best performance and durability by overwhelming strength
K0916P1 headset A K0916P1 headset with a built-in microphone for Kenwood type radios. It has a PTT button on the separate wiring that allows you to attach it onto any tactical equipment or put it down your sleeve and directly into your hand. Designed for: Baofeng radios / Kenwood plug radios Made of: plastic Weight: 60g Color: black Manufacturer: Baofeng
Gun bag made of durable 600D nylon and padded by foam. It has a main compartment with a length of 100cm, 4 internal pouches for magazines, and a MOLLE laser cut panel on the outside. Weight: 780 g Material: nylon 600D Camouflage: black Length mm: 1000 Height mm: 280 Width milimeters: 80==
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic. The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The...
Complete assembly cylinder for MB01 / 04/05/08 series replicas Made of: metal Application: MB01, MB04, MB05, MB08 Producer: WELL
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Applied with high strength material providing high-quality external texture. Special design of follower makes sure no BB left after the final shot. Compatible with most AEG at the market.
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
Annex MI-3 is a light mask made of polyethylene by a process of injection molding. This provides high elasticity and resistance to damage. The mask features a lens fast change function that allows adapting the mask to current weather conditions without having to possess a separate mask. The visor is a polycarbonate construction with two layers, covered...
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts.
| Weight: | 760 g |
|---|---|
| Material: | plastic, aluminum |
![CYMA HI-CAPA 5.1CM.128 [CYMA]](https://airsoftguns.ie/11579-home_default/cyma-hi-capa-51cm128-cyma-.jpg)
![100CM RIFLE BAG - BLACK [PJ]](https://airsoftguns.ie/19261-home_default/100cm-rifle-bag-black-pj-.jpg)
