The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
High Quality Army Paint Spray Quick dry 400 ml.
For use on weapons, vehicles, textiles, tools
Easy removable from most of surfaces
PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Base : Alkyd resin
VOC-content : Approximately 83% w/w
Solid content : Approximately 17% w/w
Gloss : Mat <5 at an angle of 60°
Dust dry : After 10 to 20 minutes
Tack free : After approximately 45 minutes
Hardened/re-sprayable : After 16 hours
Heat resistant : To 110°C
TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your...
The P361 pistol replica was made of metal and plastic. It's the models of the pistol that set out for the first adventures in the ASG world. A replica of good quality gauges in terms of price, reliability and accuracy of the presented model.
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
*WARNING! PRODUCT IS NOT INTENDED FOR USE DURING tactical games / WAR / ASG.* The manufacturer or seller (AirsoftGuns.ie) is not responsible for product damage incurred in connection with the use of games in the tactical / military / ASG. The manufacturer or seller (AirsoftGuns.ie) shall not be liable for any injury to person or property arising from the...
The bag is made of nylon fiber. Thanks to the large amount of dividers and pockets, it is possible to carry many tools and minor accessories. The bag can be mounted on the PALS webbing which meets the MOLLE standard, it can be worn on a waist belt or on the shoulder. The main compartment is 215x80x170mm big and is equipped with a inner flat pocket. The...
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
Weight: 100 g Color: black Length: 165 mm Material: metal Magazine model: low-cap Magazine capacity: 30 BBs Manufacturer: CYMA
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: T-CONNECTORAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
Made of aluminum silencer adapted for mounting on barrels with 14CCW thread. Material: Aluminum Thread: 14 mm CCW Weight: 75 g Color: Coyote
FAST PJ Helmet only Cover A helmet cover by Ultimate Tactical. Made from nylon material, reinforced with RIP-STOP weave. Features a hole for a night vision goggles mount.
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: small TamiyaAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
Webley cartridge can accept one 6mm BB pellet. High power shells. Please note; the gun can shooting over 1 Joule!
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
High Quality Army Paint Spray Quick dry 400 ml.
For use on weapons, vehicles, textiles, tools
Easy removable from most of surfaces
PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
![M4 CM.612 - Black [CYMA]...](https://airsoftguns.ie/14077-home_default/m4-cm612-black-cyma-airsoft-rifle.jpg)