The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
High Quality Army Paint Spray Quick dry 400 ml.
For use on weapons, vehicles, textiles, tools
Easy removable from most of surfaces
PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Base : Alkyd resin
VOC-content : Approximately 83% w/w
Solid content : Approximately 17% w/w
Gloss : Mat <5 at an angle of 60°
Dust dry : After 10 to 20 minutes
Tack free : After approximately 45 minutes
Hardened/re-sprayable : After 16 hours
Heat resistant : To 110°C
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: tan
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Made of: Aluminum Weight: 10g Manufacturer: SHS
Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2100 mAh Length: 103 mm Width: 34 mm Accumulator voltage: 7,4 V Height: 16 mm NOTICE! Batteries are covered only by starting warranty.
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
AGM L96 Series Low-Cap Magazine (MP002 - 22 Rounds) Injection molded polymer construction High tension steel spring ensures reliable feeding 22 round capacity Compatibility: AGM/Matrix/JG MP002 Type 96 Airsoft sniper rifles Capacity: 22 rounds Materials: Injection molded polymer Manufacturer: AGM
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Charger LED status;Power on; Green Normal; BrightStatus indicationCharging; RedFull Charged; GreenFailure; RED BLINK
Goggles FL8008 Clear Weight: 5 g Material: ABS Color: black Protective visor: plexiglass Color of glasses: yellow
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts. Weight: 1150 g Material: 1000D polyester Length: 300 mm Camouflage:...
Provides optimal comfort and some of the most natural grip positioning, prevents fatigue, increases speed and long term accuracy. Weight: 75 g Material: polymer Color: black Length: 130 mm
Design to fit pistols with laser or flashlight mount. Retention system with additional velcro strap to secure weapon. Fully adjustable leg straps with rubberized strips eliminate sliding and quick release buckles. Built-in magazine pouch. It will fit medium or large size pistol. 2 Ways Carrying: Leg Harness and Waist. Weight: 460 g Material: 600D...
Spring-powered replica of Japanese Arisaka Type 38 bolt-action carbine used in various armed conflicts from World War I to the Vietnam War. A inner barrel and hop-up bucking in the VSR10 system, a brass cylinder (25x176mm) and a 90 degree metal trigger group assembly. The stock is made of high-quality real wood, and the elements such as barrel, bolt,...
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft
The grip was made of durable plastic. It is mounted on a 22mm RIS rail and fits most of the replicas which are equipped with a RIS rail. There are flashlight pressure switch's attachment points located on the side of the replica. It can also be a placed to mount a laser target marker switch. Weight: 85g Made of: plastic Color: black Manufacturer: FMA...
High Quality Army Paint Spray Quick dry 400 ml.
For use on weapons, vehicles, textiles, tools
Easy removable from most of surfaces
PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
![GOGGLES FL8008 - YELLOW [PJ]](https://airsoftguns.ie/16067-home_default/goggle-fl8008-clear.jpg)
