The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
- Weight:120g
- Gross Weight:170g
- Color:Black
- For Comtac I and II Headset and OPS CORE style helmet rail
- Made by Element
Easy Install On ARC
For Comtac I and II Headset and OPS CORE style helmet rail
Rail Adaper For Install Flashlight or Laser pointer
Smart Oil™ Silicon Oil Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. An innovative formula of Smart Oil™ was designed thanks to cooperation of an experienced manufacturer of conservation agents and active airsoft players. This resulted in a product that fulfills the needs of player as much as...
DESCRIPTION: BDU jacket made of 65% polyester and 35% cotton WEIGHT (GR): 600 BRAND: Fostex
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each...
HFC magazine for: *HG-192 *HG-194 *HG-199 Presented magazine can be powered only by CO2 capsule. Weight: 280 g Magazine capacity: 23 BBs Material: aluminum Color: black
8mm oilless bushings For any 8mm gearbox. Manufactured by SHS. Made of steel. Incredibly durable.
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
Allows mounting optics to AK rifles. Replaces existing AK receiver dust cover. Fits most AEG AK pattern rifles, but it may require additional matching.WARNING! It does not match the CYMA 045 replicas, it is too long for them.Does not match - CM.045, CM.045A, CM.045C. Weight: 290 g Color: black Material: aluminum, steel Length: 290 mm Replica Model: AK...
Theta Optics 2,5-10X40 Scope equipment is a quarantee of high quality for a reasonable price. Closed in a durable metal housing, transparent optics with a cross sight of mid-dot type and adjustable magnification. Thanks to the backlight of the crosshair (red,blue or green) you can use the scope successfully either during the day and night. The power...
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Tactical Lanyard - Olive Drab A tactical lanyard made of nylon with a length of 520 mm. Features a tear-away buckle that allows for a rapid detachment.
Weight: 190 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Length: 120 mm Width: 20 mm Accumulator voltage: 9,6 V Height: 20 mm NOTICE! Batteries are covered only by starting warranty.
Set of two lithium batteries CR2032 manufactured by Energy Cell Is used to power flashlights, dots and scopes with illuminated cross. One package includes two batteries. Weight: 10 g Diameter mm: 19 Battery voltage V: 3
DESCRIPTION: Good Wire is essential for connecting the Battery to the Gearbox Constructed of Large Capacity Silver Plated Copper Wire. Perfectly welled together for maximum current flow.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Taiwanese replica of STTI company is made of ABS. Metal are trigger and hammer. The gun has a standard for this class performance and is designed for people who appreciate reliability and economical gas consumption. Set includes: * USP replica * Green Gas magazine
DESCRIPTION A Rifle of the well-known Belgian PDW FN Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates. Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and anti-terrorist groups in...
- Weight:120g
- Gross Weight:170g
- Color:Black
- For Comtac I and II Headset and OPS CORE style helmet rail
- Made by Element
