The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
- Patch PVC with velcro at backside
- Dimension: 8.7 X 8.7 cm
- Patch PVC with velcro at backside
- Dimension: 8.7 X 8.7 cm
Vertical grip lightweight. M-LOK model. BLACK / GRAY color. Weight 40gr. Length 84mm.
A vest made on nylon mesh. Features belts, three on each side, that are used for size adjustment. On the back, there are three 50 mm wide belts. The vest can be divided into two parts and has a zipper closure. On the right flap, there are three single pouches for STANAG magazines and a handy pocket with a hook and loop fastener for the attachment of...
KOER Super-90 Combat Tri-Barrel Shotgun with Retractable Stock - Tri-Shot M56DL Pump Shotgun - Polymer Construction - 30 rounds loading capacity magazine (Include Two Shell)- Black Color
Made of aluminum silencer adapted for mounting on barrels with 14CCW thread. Material: Aluminum Thread: 14 mm CCW Weight: 75 g Color: Coyote
Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Tactical gloves used in many fields: airsoft, motorcycle, shooting training, outdoor sports, survival, trekking, etc. The good quality with protective functions like breathable, quick-dry, and hard-wearing features make this affordable prices product very popular. Weight: 150 g Material: spandex, plastic rubber, 1000D polyester
Full metal shotgun powered by Green Gas with a muzzle velocity of 300-328 fps (measured on 1 bb). Equipped with a fixed hop-up, 3 inner barrels, switchable fire mode of 3 or 6 bbs at once and gas cartridge stored in the stock or pistol grip (depending on the model). NOTE! You can use shotshells in the Marui standard like CYMA shotshells. The set...
Airsoft Light Ergo Keymod Angled Fore Grip Ergo Keymod comfort grip Easy to install Designed for Keymod rails Length: 100 mm
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
Inlet Valve An inlet valve made from stainless steel, designed for most gas magazines and 40mm grenades.
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
Great replica in scale 1:1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by Double Eagle specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. In the set with replica you have a magazine...
- Patch PVC with velcro at backside
- Dimension: 8.7 X 8.7 cm
![M4 CM.068D Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16478-home_default/m4-cm068d-full-metal-cyma-key-mod-aeg-rifle.jpg)
![Airsoft M309 Pump Shotgun - Black [EE]](https://airsoftguns.ie/16263-home_default/airsoft-m309-pump-shotgun-black-ee-.jpg)