Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
KP07 replica manufactured by KJ Works was made almost entirely from metal.
|
CO2 12g capsule
€0.85 |
|
|
High Capacity BB speed Loader (100rds, 6mm pellets) black
€4.95 |
|
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
KP-07 pistol replica (CO2)
KP07 replica manufactured by KJ Works was made almost entirely from metal. Only elements made from polymer are some small parts from inner mechanism.In addition, grip covers are made of gum rubber, which provides a comfortable grip and increases the stability of the gun when handling it with gloves or in a moist environment.
The model is made very carefully and is well-balanced, which greatly improves its stability during use. Pistol weight - almost 1kg - makes it more realistic and balances strong blow-back system.
Importantly, the replica can be easily and quickly dismantled for cleaning, what is very important when using gas replicas.
The replica has sided wing fuse located within the thumb and index finger. The second form of protection against an accidental shot, f.ex due to snagging the trigger of the holster is lock, which is located behind the grip. There is no possibility of putting a shot if the replica is not properly held in the hand.
We are dealing with a very realistic blow-back. With each shot the slide moves backward, and then returns to the starting position while loading the next bullet into the chamber. After the last shot the slide remains in the rear position.
Gas replicas Pistols - CO2
Hop-Up; Yes, adjustable
Lenght; [mm] 225
Made of; Metal + plastic
Magazine capacity; [pcs] 26
Magazine type; Low-Cap magazine
Manufacturer; KJ Works
Name Replika; KP07 CO2
Propulsion / Powered by Gas propulsion - CO2
Type of fire; Single
Velocity [FPS] ~328
Warranty; 1month
Weight [g]; 930
Set includes:
- replica
- magazine
- Allen key
KJW KP-09 CZ75 GBB Airsoft Pistol (CO2 Version)-- Semi-Automatic Airsoft Gas Blow Back System-- Come With 24 Rounds Loading Capacity CO2 Gas Power Magazine-- Full Metal Slide and Frame
M9 Gas blowback airsoft gun by KJW ASG. Full metal, Muzzle Velocity: ~328 FPS, Internally this new version is equipped with the newest reinforcement parts that are so durable you can power it with Co2 or gas.
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity...
The replica is made entirely from metal, with the exception of, naturally, grip panels and a magazine base that is made from ABS. In combination with excellently operating and powerfully “kicking” blow-back, it provides increased realism as well as influences significantly the durability of the construction
M9A1 replica is a reproduction of a popular Italian pistol. Replica was made from polymer and metal. It"s characterized by a nice weight - 1kg! because it"s almost full metal -skeleton, slide, magazine and barrel were made from metal. Only grip covers were made from polymer. Please note!!! Gun came without markings / serial number!!!
Styled after the famous G Series pistol the KJW-KP13C offers a custom look similar to Agency Arms and SAI without their price tags. The KJW KP-13C co2 is the new lighter version of the KJ Works KP-13, it features a stylish pistol frame has been known for years before the introduction of the similar pistols that uses polymer body which has a textured...
Green Gas Adapter for CO2 Replicas A Green Gas adapter made from high quality aluminum with the use of CNC technology, which allows for powering a CO2 replica with Green Gas. Compatible with 12g standard. Attention: Some replicas designed to use CO2 may not be compatible with Green Gas due to implementation of components requiring a gas of higher pressure!
1;1 Replica of Original colt 1911 pistol gun perfect compliment to your WWII collections. Realistic blowback action. Colt 1911 is the best-known of John Browning's designs to use the short recoil principle in its basic design
KJW M9A1 Beretta Vertec Full Metal (CO2) pistol replica by KJW made from metal and ABS. Metal parts include the frame, slide, barrel, all mobile elements as well as the magazine. Polymer parts include the grip panels. Under the barrel is located a 22 mm RIS rail that allows for attachment of all kinds of laser sights. The replica features a winged safety...
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
The Webley Revolver was the standard issue service pistol for the armed forces of the United Kingdom and the Commenwealth from 1887 until 1963. Webley Revolver is a top-break revolver with automatic extraction, which means those ammos will automaticlly extract from the chamber when users open the chamber. Webley MKVI was officially adopted in 1915 and...
This is the newest model from WE-TECH. This pistol is well known from movies, games and is also used by many of forces. The slide is made from high-quality aluminum and the lower body from a durable polymer. On attention deserve the pistol grip that has changeable pads for better handling. The grip in combination with very good chosen weight gives his...
M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.
The replica was made of high-quality metal and polymer. Metal parts include the slide of the replica while the frame was made of polymer. The top of the slide features comfortable iron sights with a fiber-optic front sight. The replica is powered by a 12 g CO2 capsule, installed directly in a magazine. The magazine itself is a two-row kind, which allows...
Standard Version of Co2 WE M92 Airsoft Pistol, Full Metal Construction, Gas Blow Back Pistol with Semi-Automatic Shooting Mode, Extreme smooth slide cycling with clicks & clacks metal sound, 25+1 Rds High Loading Capacity Magazine.
The replica is made entirely of metal. The only elements made of polymer are the pistol grip panels. The magazine can hold up to 24 BBs. The loading of the magazine is very simple thank to a round opening located on the side of the spring. The replica features a winged safety on the slide, similarly to the live firearm original. The Blow-Back system...