The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The load bearing system comprises of a case handle and a belt attached to both sides of the case.
1000mm gun bag
A simple, 1000mm gunbag. Stored contents are protected by a thick layer of foam and a reinforced layer of nylon. Inside the case is an additional cargo compartment measuring 320x240mm, which can store a sizeable amount of magazines. The sewn inside Velcro belt allows for attachment of a belt for shells or a holster (not included in the set). A flat pocket measuring 580x190mm can store pistol or other accessories. The load bearing system comprises of a case handle and a belt attached to both sides of the case.
Rifle bag Predator Rifflebag from 100% nylonLenght 122 cm
Made entirely of durable nylon bag / carrying case, dedicated to carry 2 carbines or 1 machine gun.
Shotgun pouch fitted with MOLLE system. 73 X 14 cm It"s made from durable nylon replica bag. Its dimensions make it an ideal choice for transporting your shotgun. It"s accordingly stiffened to prevent any distortions and increase your comfort during transport. It"s also equipped with adjustable shoulder strap mounted by metal carabiners. On the opened...
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Weight: 215 g Length: 460mm Material: plastic Width: 85mm Hydration pack capacity: 2,5 l NOTE! Hydration pack just for cold drinks.
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
Spare hydration bladder Capacity: 2L
Utility backpack made by high density nylon material. Drawstring collar closure. Top-loading main compartment with flip top.
Utility backpack made by waterproof high density Nylon material, Huge volume of capacity, able to store 2 Rifles (Sniper/Rifle), 1" molle webbing throughout the backpack, Extendable Gun Pouch is able to store up to 46"(~120cm) long rifle gun.
Rifle bag Predator Rifflebag from 100% nylonLenght 122 cm
Case Qty: 6 pcs Weight: 1600 g Material: 600D polyester Length: 900 mm Width: 65 mm Camouflage: woodland Height: 340 mm
Weight: 1000 g Material: 1000D polyester Color: black Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
Shotgun pouch fitted with MOLLE system. 73 X 14 cm. Shotgun cover It"s made from durable nylon replica bag. Its dimensions make it an ideal choice for transporting your shotgun. It"s accordingly stiffened to prevent any distortions and increase your comfort during transport. It"s also equipped with adjustable shoulder strap mounted by metal carabiners....
Utility backpack made by waterproof high density Nylon material, Huge volume of capacity, able to store 2 Rifles (Sniper/Rifle), 1" molle webbing throughout the backpack, Extendable Gun Pouch is able to store up to 46"(~120cm) long rifle gun.
The load bearing system comprises of a case handle and a belt attached to both sides of the case.
