The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Very well made replica of G36K by [WORKS J.G.]. It is replica of assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The body is made from high quality ABS that is very durable and looks almost as polymer that is used in real firearm production. All replica parts are fit very well.
The replica has a gearbox with a quick spring change.
It does not require removing the gearbox from the body to change the spring.
Attention by changing the spring you lose the warranty!
Very well made replica of G36K by [WORKS J.G.]. It is replica of assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The body is made from high quality ABS that is very durable and looks almost as polymer that is used in real firearm production. All replica parts are fit very well.
Replica like original is equipped in both sided accessories and it can be used by left and right handed Operators:
* two sided selector lever
* two sided magazine latch
* two sided charging handle
NOTICE! Replica have a unique serial number!
Replica have long picatinny rail on top and all tactical accessories mounted on 22 mm rail can be mounted on it. There is possibility to mount two extra rails on both sides of front grip.
The replica has a gearbox with a quick spring change.
It does not require removing the gearbox from the body to change the spring.
Attention by changing the spring you lose the warranty!
Weight: 2650 g
Color: black
Material: aluminum, ABS
Fire mode: auto, single
Magazine model: hi-cap
Magazine material: ABS
Accumulator included in set: YES
Accumulator type: cube
Accumulator type: NiMH
Accumulator connector type: small Tamiya
Accumulator cells type: mini
Gearbox version: 9 mm
Bearings type: steel ball-bearing
Bearings diameter: 8 mm
Warranty period: 1 month
Serial number: YES
Serial number: YES
Length: 870 mm
Magazine capacity: 470 BBs
Accumulator voltage V: 8,4
Accumulator capacitance mAh: 1100
Length of internal barrel: 360 mm
Muzzle energy: ~1J
Muzzle velocity fps: ~328
Diameter of Internal barrel: 6,08 mm
Replica Model: G36
Manufacturer: J.G. WORKS
* 608-2 replica covered by 1 month warranty
* magazine for 470 BB`s
* NiMH 8,4V 1100 mAh battery
* battery charger
NOTICE! Batteries and chargers are covered only by starting warranty.
Every replica pass initial check up. It`s being checked and overshooted on XCORTECH X3200 chronograph.
REPLICAS AVAILABLE ON AIRSOFTGUNS.IE MIGHT BE PURCHASED ONLY BY ADULT USERS. PRODUCTS FOR ASG AND MILSIM USE ONLY.
Also we want to report that mistakes in product description and on photos cannot be basis for complaint.
1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...
battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
V2 gearbox frame with quick spring change system, processor unit with built - in MOSFET system. Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of...
Semi- and full-automatic electric assault rifle – G36C Airsoft AEG
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
RIS rail system and an ergonomic pistol grip replica of the AK47 assault airsoft rifle that has got all of the advantages of the base model. - V.3 gearbox Please note; Battery and charger not included!!!
Battery with charger inc.. Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body,...
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
Very well made replica of G36K by [WORKS J.G.]. It is replica of assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The body is made from high quality ABS that is very durable and looks almost as polymer that is used in real firearm production. All replica parts are fit very well.
The replica has a gearbox with a quick spring change.
It does not require removing the gearbox from the body to change the spring.
Attention by changing the spring you lose the warranty!
![M4 CM.612 - DARK EARTH [CYMA]](https://airsoftguns.ie/12531-home_default/m4-cm612-dark-earth-cyma-.jpg)
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
