The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of Gearbox v2 with quick spring change system mounted on 7mm steel ball bearings.
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€7.95 |
The Double Bell airsoft replica has good performance straight out of the box, good fit of elements and a high quality of materials used. The replica is mostly made of metal, the butt stock and pistol grip are made of polymer. Small elements such as the muzzle device, forward assist, mounting screws and magazine are made of steel.
A functional bolt-catch makes it easy to adjust the hop-up system. The Double Bell airsoft carbine has a quick spring change system, thanks to which we do not have to unscrew the gearbox skeleton to adjust the muzzle velocity to the current requirements of the game.
A steel hi-cap magazine with a capacity of 300 BBs is included with the replica.
Features of the replica:
- modular handguard with three RIS rails/ Picatinny rails
- adjustable stock
- functional bolt catch
- a set of flip-up folding sights
- slots for attaching the QD sling
- steel silencer mounted on a 14mm left-hand thread
- metal hop-up chamber
- 6.03mm inner barrel
- durable V2 gearbox based on 7mm bearings
- quick spring change system
The set does not include battery and charger.
The set includes:
- replica
- magazine
- user manual
Weight: 3060 g
Bearings type: steel ball-bearing
Gearbox version: v.2
Bearings diameter: 7 mm
Muzzle velocity: ~328fps
Accumulator connector type: small Tamiya
Accumulator included in set: NO
Magazine capacity: 300 BBs
Material: aluminum, polymer, steel
Color: black
Length: 700/780 mm
Muzzle energy: 1J
Length of internal barrel: 285 mm
Fire mode: auto, single
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
This Green Gas M9A1 Berette vertec airsoft gun, from KJ Works, is an full metal gun. Note! Markings on replica made be different.
A vest made on nylon mesh. Features belts, three on each side, that are used for size adjustment. On the back, there are three 50 mm wide belts. The vest can be divided into two parts and has a zipper closure. On the right flap, there are three single pouches for STANAG magazines and a handy pocket with a hook and loop fastener for the attachment of...
FOSCO Badge 101st airborne US- Metal construction- Official insignia
Introducing a robust reproduction of the Submachine Gun MK5 by [S&T], a formidable counterpart to the renowned Sten, solidifying its status as an iconic weapon in the British armed forces. Constructed from stamped steel, this firearm underwent rigorous trials as a potential successor to the Sten in early 1944 and swiftly earned its place among...
Fully Adjustable. Fits all handguns even with tactical lights. Compatible with all MOLLE platforms.
A target for training shooting with a sports carbine at a distance of 50 meters.Target size is compliant with ISSF regulations.Sheet: 200 x 200 mmOffset 80 g paper
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
GFC Energy LiPo smartchargerA very intuitive and easy to use smartcharger by GFC Energy, equipped with a built-in balancer. Can be used to charge both 7,4 V as well as 11,1 V LiPo batteries. The charger is supplied with an autodetection system allowing it to Automatically go into standby mode after the charging process is finished.CAUTION! The charger...
Goggles with a polycarbonate visor and a frame made of resistant TPU material. NOTE: Goggles provide protection from an impact that can be caused by airsoft bbs. Although they are tested, they are not unbreakable. The manufacturer or seller is not responsible for product damage incurred in connection with the use of games in the tactical/military/ASG. The...
An imitation of the Russian PBS-4 silencer for AKS-74U carbine made of CNC aluminum. Compatible with 14mm CCW and 24mm CW treated barrel. Weight: 600 g Material: aluminum Color: black
A long-awaited replica of ARMY ARMAMENT's 1911 Darkstorm already on sale. The aim of ARMY was to launch a product for customers who are looking for a pistol with reliable combat characteristics, long range, fly straight and hit hard, but also a beautiful appearance with made of accuracy, precision finish and durability of construction. Please note!!! Gun...
Taiwanese replica of STTI company is made of ABS. The gun has a standard for this class performance and is designed for people who appreciate reliability and economical gas consumption.
This is the newest model from Wei-E Tech. This pistol is well known from movies, games and is also used by many of forces. The slide is made from high-quality aluminum and the lower body from a durable polymer.
Gloves are an excellent choice and will prove ideal for any situation that requires hand protection. Both during combat and daily use. They are also intended for users, for whom combat is everyday work. The Shield gloves guarantee the best protection against hand injuries which are related to hits or hand to hand combat. Material: 600D polyester,...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
Combo magazine pouch can hold 5.56 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG) or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of Gearbox v2 with quick spring change system mounted on 7mm steel ball bearings.
