Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ uncomplicated methods. Notably, a single person could manufacture the Sten Gun in just five hours, showcasing its efficiency and practicality. The replica 058 is predominantly constructed from steel, faithfully recreating the robust features of the original Sten submachine gun. Part like barrel, thermic shield, bolt chamber, lower receiver, magazine, trigger guard, butt stock ar made of steel, only the stock tube is made of aluminum.
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ uncomplicated methods. Notably, a single person could manufacture the Sten Gun in just five hours, showcasing its efficiency and practicality.
The replica 058 is predominantly constructed from steel, faithfully recreating the robust features of the original Sten submachine gun. Part like barrel, thermic shield, bolt chamber, lower receiver, magazine, trigger guard, butt stock ar made of steel, only the stock tube is made of aluminum. The Sten, renowned for its historical significance, had a distinctive trait of being capable of only firing in a continuous mode in its original form and uses a low cap magazine with a capacity of 50BB dedicated to the [MP007] which is a replica of the MP40..
The core of this airsoft Sten replica lies in its reinforced metal gearbox V7, equipped with steel gears mounted on smooth polycarbonate bearings. With an initial velocity of approximately 328 FPS, the submachine gun is perfectly suited for actions at medium and short distances. In the 058 model, the hop-up system has been improved and is adjustable. The battery is housed in the fixed stock, which can be removed by unscrewing it from the body using an Allen key provided in the kit. The replica uses a low-capacity magazine with a capacity of 50 BBs, dedicated to the [MP007] model, famous replica of the MP40.
Package Includes:
- Airsoft Rifle 058 Sten MK II
- 50 bbs Mid-Cap Magazine
Not include battery and charger!!!
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
Very well made replica of G36K by [WORKS J.G.]. It is replica of assault rifle that is commonly known in the world. Original firearm is used by special forces like: SAS, GROM, Bundeswehr, GOE, Spanish Air Force and many more. It also popular in the airsoft sport environment because of relation between price and realization. The body is made from high...
The CYMA AK74M is the latest addition to the Cyma's AK line up of AEG. The receivers are solid metal and the stock/pistol grip/hand guards are made of a durable ABS plastic. In addition to the fantastic construction of the body CYMA has added the full size side folding stock for easy storage and maneuverability. The internals are the same as the other...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
G&G CM16 Raider M4 RIS airsoft rifle (Desert Tan) - Accessible in the stock tube,- it is compatible with all upgrade parts from SYSTEMA, LAYLAX, DEEP FIRE
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The CM16 Carbine carbine replica made by G&G was made within the Combat Machine Project which goal is to deliver high class replicas in the price which can be considered economical. The Combat Machine replica characterize themselves by the highest, characteristic for the G&G company, quality of make and the operation culture as also the high class...
Semi- and full-automatic electric assault rifle – G36C Airsoft AEG
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...