The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
This Green Gas M9A1 Berette vertec airsoft gun, from KJ Works, is an full metal gun.
Note! Markings on replica made be different.
Speedloader for Magazines Made from semi-transparent polymer. The tool allows for rapid and accurate loading of Mid / Low / Real-cap magazines and all kinds of gas grenades or mines. The speedloader has the shape of a pistol magazine so it can be easily stored inside a magazine pouch. The set also includes an adapter that makes it easier to fill sniper magazines. |
High Capacity BB speed Loader (100rds, 6mm pellets) black
€4.95 |
|
|
Smart Gas™ - 1000ml
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
|
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€12.95 |
There are no markings or trademarks on the slide, but the gun still looks great and at a fraction under 1kg, it's a weighty gun too!
Out of the box with a full metal body, this 92F Beretta from Kuan Ju is a bargain. Shooting performance is good, when using Top Gas, this airsoft pistol is able to deliever 328fps. Metal slide offers a very pleasant blowback force and sound nice. Note that there is no M9 logo on the pistol grip - Kuan Ju places it's own KJ logo on the grip. This airsoft gun makes a great side arm on your next skirmish / wargame"
FULL METAL CONSTRUCTION resemble the M9 Beretta (1:1 Ratio)
Gas Blow Back airsoft Pistol with Semi-Automatic Shooting Mode
Extreme smooth slide cycling with clicks & clacks metal sound
NEW VERSION with Improved Weight Distribution
Adjustable HOP UP System
Strong recoil feel (better hold with both hands)
Super real gas series for special operation use
26 Rds Loading Capacity Magazine (Compatible with Tokyo Marui & HFC M92F Magazine)
Resemble the same mechanism of Tokyo Marui
Full Metal Front & Rear Sight
Excellent Craftsmanship with Textured grip and Solid Pistol Frame
Tactical Lower RIS Rail Take Optional Flashlight & Laser Sight
Special textured handgrip offer firm hold of pistol with gloves on
Equipped with 20mm lower rail for Flashlight or Laser Sight attachment
Powerful 328fps with HFC22 TOP GAS (HFC134a is not recommended)
Can take Red Gas without modification
This gun can be strip-down like the real steel
Matt Black Finish look very realistic
SPECIFICATION:
System: Airsoft Gas Blow Back
Muzzle Velocity: ~328 FPS (Feet Per Second) with 0.20g BB
Magazine Capacity: 26+1
Propellant: Airsoft Green Gas or CO2 (additional Co2 compatible magazine sold separately)
Weight: 1080g / 2.38lbs with standard gas magazine
| Manufacturer | KJ Works / KJW |
| Package Includes |
|
The latest version of the popular CYMA AEP electric pistols. However, this time, despite the unchanged appearance, we have an absolute novelty inside. The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer. Durable steel gears...
SR-33 REPLICA TT [SRC] The replica is made mostly of metal elements. The only element made of plastic are the pistol grip cladding. SR-33 REPLICA TT [SRC] is characterized by precise fitting of parts and a great work culture of the lock. Single-row magazine holds 11rd. The replica reaches the muzzle velocity up to ~ 280 FPS. Gun grip linings, markings on...
A replica of the M712 pistol, it was made entirely of light alloys. Elements such as the trigger or hammer are movable and made of light alloys. This model does not have a blow-back system, but the safety and rear sight are functional. The replica is very durable and faithfully reproduced in relation to the original, the 1: 1 scale has been preserved.
The replica is made entirely of metal. The only elements made of polymer are the pistol grip panels. The magazine can hold up to 24 BBs. The loading of the magazine is very simple thank to a round opening located on the side of the spring. The replica features a winged safety on the slide, similarly to the live firearm original. The Blow-Back system...
Spring powered replica of Walther P99 pistol. Has original manufacturer's markings on slide and grip. Frame, slide, barrel, magazine and grip are made of high quality ABS composite. Made of metal are: trigger, magazine release button and safety lever. The replica is equipped with fixed HopUp system, which significantly improves the accuracy and range of...
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
M9A1 replica is a reproduction of a popular Italian pistol. Replica was made from polymer and metal. It"s characterized by a nice weight - 1kg! because it"s almost full metal -skeleton, slide, magazine and barrel were made from metal. Only grip covers were made from polymer. Please note!!! Gun came without markings / serial number!!!
The replica is made entirely from metal, with the exception of, naturally, grip panels and a magazine base that is made from ABS. In combination with excellently operating and powerfully “kicking” blow-back, it provides increased realism as well as influences significantly the durability of the construction
Weight: 625 g Material: nylon Color: black Length: 320 mm Width: 250 mm Height: 65 mm
The replica was made of durable polymer and metal. Metal parts include the slide and small elements such as the screws and magazine elements. The replica’s frame was made of polymer. The replica is powered with electricity which means that it can be easily used during winter games. Hop-Up system is one of the biggest advantages of this pistol, which...
Features: · Full Metal Construction · Textured Grips · Realistic Blowback Action · Ambidextrous Safety · Beveled Magazine Well · Night Sight Set (Fluorescent Green) · Integral Accessory Rail · Silencer adapter for 14mm CCW Please note!!! Gun can came without markings and with black piston!!!
Full Metal, green gas powered Beretta M9 IA pistol replica. Manufactured by KJ-Works for the Danish company ASG DK. It was made entirely of metal. Composite, as in original are only grip pads. With its non-slip texture, this model will fit perfectly in your hand. The gun is equipped with Blow Back system, which gives strong recoil. After shooting the...
TITAN 4’ Revolver Replica solid by SRC made almost entirely of metal. Elements of the mechanism such as the hammer, trigger or the drum are also made of metal. The only polymer part is the pistol grip. The replica has a realistic mock shell-feeding system into the rotary drum - exactly as in the case of a live revolver. Each shell carries a single BB. The...
KP-05 [KJW] (HI-CAPA) is made from high quality aluminum. The grip in combination with very good chosen weight gives his operator feeling like holding a real gun. Replica can be powered by green gas or CO2, it`s depend which magazine type we use.
A semi-automatic gas operated version of the classic M92F. Used by many law enforcement agencies and military forces around the world, and has appeared in countless action movies. This popular replica holds 21 BB’s in the magazine and has fixed Hop-up. Please note!!! Gun can came without markings.
A revolver replica made mainly from metal. This allows it to retain a significant weight and appropriate balance. Metal elements include: the frame, barrel, cylinder magazine, trigger and hammer. Polymer parts include only the grip side panels. The replica is powered by a standard 12 g CO2 capsule that allows to fire projectiles with a muzzle velocity of...
This Green Gas M9A1 Berette vertec airsoft gun, from KJ Works, is an full metal gun.
Note! Markings on replica made be different.
![9" nylon gun case - BLACK [SRC]](https://airsoftguns.ie/16250-home_default/9-nylon-gun-case-black-src-.jpg)
