On sale

Double rifle gun case 120cm airsoft - Olive

The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.

Price €39.71 Regular price €52.95
More
In stock

Double Rifle case 96cm long - Tan

Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...

Price €35.96 Regular price €47.95
More
In stock

Double Rifle case 96cm long - Black

The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.

Price €35.96 Regular price €47.95
More
Out-of-Stock

Level 3 Molle Assault Backpack, Airsoft OD

A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a  very easy and fast way thanks to...

Price €31.96 Regular price €39.95
More
In stock
All sale products
  • Banner

Mosfet MERF 3.2 Third generation 10 functions
  • Mosfet MERF 3.2 Third generation 10 functions
  • Mosfet MERF 3.2 Third generation 10 functions

Gate MERF 3.2 gen.3 Mosfet 10 functions

MERF-3.2

Multifunctional programmable 3rd generation MOSFET. The system has 10 functions. Its latest feature is the 3-rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment.

It protects Li-Ion batteries: LiPoly and LiFePO4. It has a built-in active brake and it protects contacts against damage. The Smart Trigger function enables achieving faster trigger response. Thanks to two operating modes, the system works with both the original and the modified AEG installation.

The system is designed for all replicas and especially for the upgraded ones. It has been adapted to work even with the most powerful springs, including M170.

€48.29
Tax included
Quantity

 

 

 

Description

MERF 3.2 - Third generation of Mosfets. It has 10 functions. The newest is 3-rd burst firing mode. The system allows for lossless rate of fire adjustment and protects modern Li-Ion: LiPoly and LiFePO4 Batteries. It has active brake and protects your AEG by eliminating trigger burn-outSmart Trigger allows for faster trigger response at the same rate of fire. Thanks two operating modes, system works with a standard and modified installation. No modification to your AEG is required. The circuit is compatible with most airsoft guns, including upgraded guns. It will operate with the strongest springs (including M170).

Key functions

mosf.png

MOSFET

Do you want to achieve a higher rate of fire and faster trigger response?

Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts.

As a result, you gain a higher rate of fire of the rifle and a faster trigger response,

and the contacts are protected against burn out.



act-bra.png

ACTIVE BRAKE

Do you care about realism? Would you like to increase the life of the gearbox?

Does your rifle have such a high rate of fire that you are not able to make a single shot?

The Active Brake sorts things out. In SEMI Mode, the brake does not allow for compressing a piston after a shot.

The piston will stop in the front position which eliminates unnecessary stresses,

increasing the service life of the gearbox and its parts. This is important, especially with an AEG power upgrade.

After releasing the trigger, the rifle immediately stops firing. So, you gain more realism and, additionally,

you do not waste your precious ammunition.



ele-fuse.png

ELECTRONIC FUSE

We know how important reliability is on the battlefield. That’s why the unit has thermal protection.

In tandem with a time-lag fuse, it fully protects your AEG installation.



bat-pro.png

BATTERY PROTECTION

Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive

to over-discharge. If you do not want to damage the battery and you care about its service life,

this protection is indispensable. The microprocessor monitors the battery voltage constantly.

When the voltage drops down to a critical level, the Controller will not allow firing.



deb.png

Debouncing (Digital Interface)

This provides full compatibility with the micro-switches. It is fully resistant to contact bounce.

You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to heating.



3rd-gen-mos.png

3RD GENERATION MOSFET

The advent of modern transistors and microcontroller has enabled us to create the smallest and most reliable

AEG Controller on the market.

rof-con.png

RATE OF FIRE CONTROL

This ensures there is no loss of the rifle’s rate of fire, so you can use stronger LiPo batteries,

and still have ROF just like in a real gun.



sma-tri.png

SMART TRIGGER

We know how vital the fast trigger response is during combat. This is why we have developed the

Smart Trigger function. It enables you to achieve a faster trigger response.

It works with the ROF Control system. During the first shot, the microprocessor sets the ROF Control to 100%.

After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence,

the first shot is fired at a full rate of fire, and subsequent shots at a reduced ROF.

The best results can be achieved by using a battery with a higher than standard voltage. For example,

if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response

with the same rate of fire as with a standard battery. The Smart Trigger is most effective when the Burst time

is set at 3 rounds.



3rd-bur.png

3RD BURST

Burst mode enables you to make 3-shot series. In this way you can save ammunition and increase the realism.

You can change AUTO mode to BURST mode or SEMI* mode to BURST mode.

If in SAFE/SEMI/BURST mode you release the trigger earlier, you can make one or two shots.

The burst time is set in the menu with accuracy to 4ms. The processor actively compensates for the change in

burst time with a decrease in the rate of fire due to battery discharging.

*SEMI to BURST in enhanced mode only



con-fir-sel.png

CONFIGURABLE FIRE SELECTOR

The function gives you the option to program your fire selector. There are five modes:

- STOCK WIRING SEMI/AUTO
- STOCK WIRING SEMI/BURST
- MODIFIED WIRING SEMI/AUTO
- MODIFIED WIRING SEMI/BURST
- MODIFIED WIRING BURST/AUTO



plug-play.png

Operating Modes

You can connect the system to a rifle in two ways. Depending on the selected method, you should set a

proper operating mode: Plug&Play or Enhanced

Plug&Play: All you need to do is connect the system between the battery and the rifle.

Enhanced Mode: It requires modification of AEG installation. We connect trigger contacts to
MERF 3.2. We can do it using the signal wire attached to the kit.

Features:

  • The system works correctly in a wide range of voltages 3.2 - 15V
  • Compatibility with the strongest AEG replicas
  • Simple installation
  • Protections
  • Very low current consumption in stand-by (0.15mA)
  • Very low resistance ~2,4mΩ
  • Compatible with all types of GearBox
  • 4 LED Display
  • DEANS-T Connectors

Included in the kit:

  • MERF 3.2
  • Additional kit of Deans-T Connectors
  • Single signal wire for trigger contacts
  • Double signal wire for trigger contacts
  • Programming button

Product Details

MERF-3.2

16 other products in the same category:

PLATELET FUSE 25A

Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems. 

Price €0.65
More
In stock

Gate TITAN v2 Basic Module Front MOSFET

TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...

Price €82.95
More
In stock

LI-PO BATTERIES PROTECTION Low Voltage Buzzer

o avoid an excessive cells discharging is advisable to use LiPo alarm. When dangerous limit voltage level per cell will be reached LiPo alarm gives sound. Model Number 2s 3s 4s voltage display, l, Measuring Range 0.5-3,6v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-3-4s  

Price €5.90
More
In stock

Gate NanoAAB 3rd gen MOSFET active brake

NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.

Price €30.74
More
Out-of-Stock

Gate TITAN v2 Advanced Complete Set front Wired MOSFET

TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your...

Price €149.95
More
In stock

Gate NanoASR 3rd gen MOSFET AEG

NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market.  Thanks to its special coating, it is resistant to atmospheric conditions.

Price €22.39
More
Out-of-Stock

Follow us on Facebook