The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
ITEM FEATURES:
Made by high density nylon.
Tactical molle belt holster for handgun, pistol and revolver.
Right handed design.
Velcro strap and buckle snap made this holster fully adjustable.
Universal holster fit various pistol frame size.
Accommodate with one pistol.
Velcro flip magazine or flashlight pouch.
Able to attach to any molle webbing vest, bag or backpack...etc.
Can also attach to waist belt or vest belt.
Perfect for outdoor war game activities.
NOTE: Please check your pistol size to fit this holster
DETAILS:
Color - Matte black
Weight - 150g
Holster size - 200mm(H) x 100mm(W)
Weight: 190 g Material: 1000D polyester Camouflage: olive Width mm: 50 Manufacturer: 8FIELDS Size L ~ 86-95cm
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
042 is a replica of a German machine gun (Maschinengewehr 42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft sight....
Hi-Cap 350 BB M4/M16 Magazine Gun suitable - Tokyo Marui, ICS, G&P, JG & D-Boys M-Series Airsoft AEG, Capacity - 400 rounds Bullet type - 6mm plastic bullet, Constructed of FULL METAL housing that is strong to drop on the floor.
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
KJW M9A1 Beretta Vertec Full Metal (CO2) pistol replica by KJW made from metal and ABS. Metal parts include the frame, slide, barrel, all mobile elements as well as the magazine. Polymer parts include the grip panels. Under the barrel is located a 22 mm RIS rail that allows for attachment of all kinds of laser sights. The replica features a winged safety...
A very powerful non-blowback airsoft pistol optimal for skirmishing. Shoot as fast as you can full the trigger.
Hand size circumference: 24 cm size: XL Weight: 100 g Material: 600D polyester, synthetic leather, neoprene, spandex, plastic rubber Color: black
Weight: 70 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
120RD GREEN GAS GRENADE
COBRA safety glasses in version with regular temples and HD lens - A revolutionary coating for exceptional clarity and light transmission.
Complete assembly cylinder for MB01 / 04/05/08 series replicas Made of: metal Application: MB01, MB04, MB05, MB08 Producer: WELL
M9 Gas blowback airsoft gun by KJW ASG. Full metal, Muzzle Velocity: ~328 FPS, Internally this new version is equipped with the newest reinforcement parts that are so durable you can power it with Co2 or gas.
A scope by Theta Optics™ 3-9*40 EG Scope is a guarantee of high quality and reasonable price. Enclosed in a durable, metal casing, vivid optics with a Mil-Dot reticle as well as a fixed magnification. The reticle can be smoothly adjusted both vertically and horizontally. The product is attached on a standard RIS 22 mm rail. Features an adjustable...
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
