Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Patch 4TAC God Will Judge Our Enemies made in 3D technology with high quality durable and flexible PVC.
Thanks to the material used and three-dimensional technique, these patches are very legible.
Attached with Velcro.
Diameter: 52 mm
Color: Coyote Brown
The silencer have 14 mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel. Weight: 120 g Material: aluminum Color: black Length: 196 mm Width: 32 mm
CM.128 is a selective-fire (semi-auto) electric non-blowback pistol. Fire-control selector switch in the form of the Safety Lever. Frame and slide made of polymer. Pistol featured with a hop up system.
Airsoft holographic 551, red dot made by aluminum alloy metal. Truly pistol size red and green dot sight. 10 levels brightness adjustment for red and green dot.
Weight: 625 g Material: nylon Color: black Length: 320 mm Width: 250 mm Height: 65 mm
Gloves are an excellent choice and will prove ideal for any situation that requires hand protection. Both during combat and daily use. They are also intended for users, for whom combat is everyday work. The Shield gloves guarantee the best protection against hand injuries which are related to hits or hand to hand combat. Material: 600D polyester,...
Cartridge 6mm for Dan Wesson, 1 piece.
The Diablo is Primary Weapon Systems answer to the 7inch AR-15/M-16 series upper. Rather than simply bolting on an existing product and calling it revolutionary, PWS stepped back and designed a system from the ground up to work specifically with the extreme pressures of the 7 inch barrels. Starting with the barrel and after careful research, PWS decided...
TO552 Red Dot Sight Replica - tan Theta Optics TO552 scope is powered with two AA batteries, which construction has been modeled on the holographic crosshairs. User may choose the red or green reticle. The product allows you to take action either during the day or night. Aiming point can be easly regulated vertically and horizontally. It has also several...
The first Airsoft pocket chronograph on the market from Xcortech. The company has extensive experience in the chronometer market. The size of the device is comparable to the Go Pro webcam and it is very easy to use and is compatible with various weights and calibers of ammunition. It has two power options, one is an AA battery and the other is to connect...
Big Steel Protective MASK Very well made mask from steel net, designed to provide high face and ears protection. Mask can be adjusts to have full wearing comfort. Weight:235 g, Material: nylon 600D, steel. Color: Woodland
The JG-0451 airsoft AEG gun is modelled on the famous Czechoslovakian made V61 Skorpion SMG or sub machine gun. The very solidly made replica has a mechanism specially constructed for this model inside that allows receiving 260 fps. The replica's parameters make it an ideal submachine gun for conducting safe games in CQB. Elements such as the stock,...
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
The silencer have 14 mm counterclockwise thread. NOTE! Can be used as an extension of the barrel to mount longer inner/precision barrel. Weight: 110 g Material: aluminium Length: 130 mm