The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
High-quality silver-plated, low resistance wire in transparent silicone insulation.
Designed for AEG replicas, its installation is highly recommended in tuned models.
Resistant to high voltage and temperature
ROHS certificate
High-quality silver-plated, low resistance wire in transparent silicone insulation.
Designed for AEG replicas, its installation is highly recommended in tuned models.
Resistant to high voltage and temperature
ROHS certificate
Diameter: 1.7 mm
Length 200 cm
Manufacturer: Arma Tech
The grenade’s diameter is 40mm and it is made of metal. The green gas grenade is designed to be used with the grenade launcher having the inner diameter of 40mm. The grenade is powered by green-gas. It holds 96 BB pellets.
25-round Green Gas metal magazine. Dedicated for WE-TECH M9/92FS series.
Made by high density nylon. Enhance the speed of magazine change. Keep the empty magazine for reloading later. Able to attached to any molle webbing vest, bag, duty belt or backpack. Color - MB
Made of: steel Weight: 130g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
Spare hydration bladder Capacity: 2L
A replica of HWS, the best for two eyes open shooting and when you need speed and accuracy. Guarantees faster target acquisition and gives the operator greater zone control. Fits all standard Picatinny rails. Illumination types: red and green.
Cartridge 6mm for Dan Wesson, 1 piece.
Allows mounting optics to AK rifles. Replaces existing AK receiver dust cover. Fits most AEG AK pattern rifles, but it may require additional matching.WARNING! It does not match the CYMA 045 replicas, it is too long for them.Does not match - CM.045, CM.045A, CM.045C. Weight: 290 g Color: black Material: aluminum, steel Length: 290 mm Replica Model: AK...
Sling for AK rifles made of strong black canvas, steel hardware, fasteners are made of leather strap. Weight: 95 g Color: black Material: steel, nylon tape, synthetic leather Manufacturer: CS
REPLACEMENT HAND GUARD FOR CYMA MP5 DOES NOT FIT SD6 OR K MODELS
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
AGM MP007 is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Picatinny mounting rail for the KAR98K sniper rifle. It is mounted in the place of the factory rear sight, thanks to which we can use scopes and collimators mounted on ris rails. Weight: 60 g Material: aluminum Color: black
High-quality silver-plated, low resistance wire in transparent silicone insulation.
Designed for AEG replicas, its installation is highly recommended in tuned models.
Resistant to high voltage and temperature
ROHS certificate
![AK SLING - BLACK [CS]](https://airsoftguns.ie/18752-home_default/ak-sling-black-cs-.jpg)
![Hand Guard for MP5 [CYMA] +...](https://airsoftguns.ie/17261-home_default/hand-guard-for-mp5-cyma-grip.jpg)
