The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Double sealed CNC cylinder head for M4/M16
A double sealed cylinder head made from high quality aluminum, dedicated for M4/M16 type replicas. It is made on CNC machinery with great precision, which guarantees perfect matching with cylinder.
The cylinder head works great with silenced piston heads.
6,03mm steel precision inner barrell - 400 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Pack of washers, manufactured by Guarder in steel, indicated for gear adjustments. Indicated for Marui AEG. A set of gearbox shims of different diameters and thicknesses. The set includes per six 0,15mm, 0,30mm and 0,50mm diameter pads. The shims are used to balance the level of the thread-wheels in the gearbox and, what is followed by it, for the most...
During charging LiPo battery needs to be remembered: * Use ONLY a charger approved for lithium batteries. * Charging each time using the balancer is advisable. It is preferable to use it at least every 5 cycles of loading. * DO NOT leave battery without supervision when it is charging. * DO NOT use broken cells. * Avoid prolonged charging, it can cause...
Combo magazine pouch can hold 5.56 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG) or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Weight: 170 gAccumulator type: NiMHAccumulator connector type: small TamiyaAccumulator cells type: miniAccumulator capacitance: 1600 mAhAccumulator voltage: 8,4 VNOTICE! Batteries are covered only by starting warranty.
Weight: 120 g Magazine model: low-cap Magazine material: metal Magazine capacity: 30 BBs Manufacturer: CYMA
A vest made on nylon mesh. Features belts, three on each side, that are used for size adjustment. On the back, there are three 50 mm wide belts. The vest can be divided into two parts and has a zipper closure. On the right flap, there are three single pouches for STANAG magazines and a handy pocket with a hook and loop fastener for the attachment of...
This combo pack contains a 9.6v NiMH nunchuck battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off. Both have small type tamiya plugs that are common to most airsoft rifles as well. Please note; battery & charger can looks different (not...
Nylon training knife,the blade made of soft rubber. The blade's length is 120 mm.
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts.
The Hi-Cap type magazine dedicated to the [Barrett M82A1] electric model. The metal construction of the magazine makes it very resistant to damage. With a capacity of 450 rounds, you can fire many shots without refilling ammunition. Weight: 280 g Magazine model: hi-cap Material: steel Color: black Magazine capacity BBs: 450 This magazine does not fit the...
Replica of very well known helmet used by US Army. It's equipped with two mounting rails, designed to hold special mount for tactical accessories such as tactical flashlights, hearing protection, etc. There is also mount for night vision goggles at front of the helmet. It have a velcro tapes allowing to attach team flags, moral pads, etc. Weight: 665 g...
Very well made silencer set that consist flash hider and suppressor. Flash hider has special outer thread for suppressor quick detaching. The flash hider has 14mm counterclockwise inner thread. Weight: 260 g Material: aluminum, steel Color: black Length mm: 126 Diameter mm: 38
- Full Metal Constructed - Red / Green Illuminated Dot, - 5 Levels Dot Brightness Control
Patch PVC with velcro
Design for Bolt Action Airsoft Sniper Rifle VSR-10 & G-Spec, Steel Construction, Reinforced trigger sear is required part upgrade in order to handle a more powerful spring, Best performance and durability by overwhelming strength
![CM.125 MAGAZINE 30RD [CYMA]](https://airsoftguns.ie/18005-home_default/cm125-magazine-30rd-cyma-.jpg)
