The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Weight: 12g
Material: Aluminum
Designed for MP5
Manufacturer: SHS
The air seal is arguably the most important part of your airsoft gun, as it is largely responsible for the deviation in shots. If you have an air leak then the power and volume of air changes, making it very hard to predict what your gun will do. If you're looking to improve the consistency of your gun, then I would definitely start with the air seal.
One of the biggest culprits of a leak is the air nozzle, either between nozzle & hop up chamber, or between the cylinder head and nozzle. Over time parts wear down, dry out etc which can reduce the quality of your gun's air seal. If this happens the best thing to do is to replace the air seal components, doing your best to use the same brand (where possible), as the tolerances are much tighter.
This particular air nozzle is for the MP5 series of guns, and as always given the nature of upgrade parts please note that they may require modifying/fitment, as there are minor differences and deviations across the different airsoft manufacturers.
SHS 2nd Sear. Steel construction. Essential part for upgrading your Airsoft Sniper. This reinforced 2nd sear design for supporting high power upgrades.
Anti-heat selector plate, MP5 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
Included 3-Ring Hop-up Bucking Adjustable Outer Diameter Reduced Barrel Vibration Balanced Weight
Heat Resistance Switch for version 3 gearbox. Precise workmanship ensures optimal current flow. Manufacturer: Arma Tech
DESCRIPTION: Good Wire is essential for connecting the Battery to the Gearbox Constructed of Large Capacity Silver Plated Copper Wire. Perfectly welled together for maximum current flow.
Reinforced piston. High intensity polymer material. Elongated model POLYGONAL with 19 steel teeth. For SR25/R85/L85 series. Lightweight design and very robust. Compatible AEG electric guns. (Not compatible with A&K gearbox).
Weight: 5 g Material: steel
Element Delta Ring and Butt Stock Tube Wrench Tool- For M4/M16 Series Rifle- Also suitable for AK Flash Hider- All-in-ONE Tool
Spring Guide w/Bearing v.3Ball bearing spring guide improves the operation of the entire mechanism (spring movement around its own axis).Also slightly improved velocity.
Double Seal Purpose: M4 Replicas Material: Aluminium Length: 21,4mm Manufacturer: Super Shooter/SHS
The ULTIMATE® Upgrade Series cylinder head have been CNC manufactured in machine-aluminium and thereafter anodized with a colour code for easy recognition
Element Hand Grip Motor cover for M4, AEGSpecial patch end-screw eliminates the troublesome to replace your motor Essential part for upgrading your Airsoft Electric Gun AEG Rifle
Model Number 8s voltage display, Display Type Analog and Digital, Measuring Range 0.5-4.5v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-8s
Teeth are made with high precision providing faultless work of gearbox mechanism. it`s great for extreme rate of fire modifications. It`s designed for v.2 and v3 gearbox.
SHS Original AEG Motor for Gearbox Ver.3 (Short Type) FEATURES: SHS standard motor short type. SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for AK / G36 Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
Weight: 12g
Material: Aluminum
Designed for MP5
Manufacturer: SHS
