On sale

Double rifle gun case 120cm airsoft - Olive

The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.

Price €39.71 Regular price €52.95
More
In stock

Double Rifle case 96cm long - Tan

Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...

Price €35.96 Regular price €47.95
More
In stock

Double Rifle case 96cm long - Black

The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.

Price €35.96 Regular price €47.95
More
Out-of-Stock

Level 3 Molle Assault Backpack, Airsoft OD

A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a  very easy and fast way thanks to...

Price €31.96 Regular price €39.95
More
In stock
All sale products
  • Banner

Gate NanoHARD 3rd gen AEG Controller 8 functions

NanoHARD

It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.

 

€37.32
Tax included
Quantity

 

 

 

Description

Key functions

mosf.png

MOSFET

Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle?

In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts.

As a result, you gain a higher rate of fire of the rifle and a faster trigger response, and the contacts are protected against burn out.

 
bat-pro.png

BATTERY PROTECTION

Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge.

If you do not want to damage the battery and you care about its service life, this protection is indispensable.

The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, the Controller will not allow firing.

 
deb.png

DEBOUNCING

This provides full compatibility with the micro-switches. It ensures full resistance to contact bounce (vibration).

You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to overheating.

 
3rd-gen-mos.png

3RD GENERATION MOSFET

The advent of modern transistors and microcontroller has enabled us to create the smallest and

most reliable AEG Controller on the market.

 
li-po-rdy.png

14.8V LI-PO READY

The system can be used with batteries up to 14.8V LI-PO. Minimum operating voltage is 3V and maximum voltage is 17V.

 
coat.png

COATING

Thanks to its special conformal coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C).

 
on-off-act-bra.png

ON/OFF ACTIVE BRAKE

The Controller provides you with the opportunity to decide if you want to use the Active Brake function.

If you do not need this, you can turn it off easily. It will lead to improving the lifespan of your motor.

 
act-bra.png

ACTIVE BRAKE

Do you care about realism? Would you like to increase the life of the gearbox?

Does your rifle have such a high rate of fire that you are not able to make a single shot?

The Active Brake sorts things out. In SEMI Mode, the brake does not allow for compressing a piston after a shot.

The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts.

This is important, especially with an AEG power upgrade. After releasing the trigger, the rifle immediately stops firing.

So, you gain more realism and, additionally, you do not waste your precious ammunition.

 
sma-fuse.png

SMART FUSE

We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable.

It protects the MOSFET against overheating, overloading and short-circuiting. If your airsoft gun becomes jammed, the function protects the motor and battery against damage.

 
bi-self-test.png

BUILT-IN SELF-TEST

It allows you to quickly check whether the AEG Controller works properly.

If you have problems with your AEG, the BUILT-IN SELF-TEST allows you to check that the problem is not caused by the Controller.

Included in the kit:

  • NanoHARD
  • Additional kit of Deans-T Connectors
  • Single signal wire for trigger contacts
  • Double signal wire for trigger contacts
  • Programming button
  • Jumper (2pcs.)

Product Details

NanoHARD

16 other products in the same category:

TACTICAL GUN SLING 2 PKT BUNGEE - tan

The sling also has a bungee feature to both ends of the sling made from top quality dual rubber belts inside the sling. The sling is adjustable for hunters and guns of all sizes. The sling is suitable for most types of rifles.

Price €9.50
More
In stock

Gate WARFET Mosfet AEG 20 Functions

WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED

Price €89.79
More
In stock

Gate TITAN v2 Basic Module Rear Wired MOSFET

TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...

Price €82.95
More
Out-of-Stock

M16A1 Mosfet Full metal Vietnam (CM.009c) Cyma

A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...

Price €249.95
More
In stock

FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]

Completed Gearbox set ready to upgrade Come With Motor The spring 115 used in the gearbox will give you +/- 380 FPS - depend on the barrel and hop-up unit, used in your replica. Essential part for upgrading your Airsoft Electric Gun AEG To build a tight & durable gearbox Compatible with Tokyo Marui, JG, AGM, CM - M4/M16. 8mm Bearing Enhanced Gearbox...

Price €69.95
More
In stock

CYMA 550rd Magazine for AK Series

The magazine fits replicas of many manufacturers, but we have realistically tested and confirmed the efficient operation of the models: CM.028 A, CM.028, CM.037, CM.028 S, CM.028 C, CM.031, CM.031 B, CM.036, CM.042A, CM.040 C, CM.039U, CM .039C, CM.042B, CM.042S, CM.042, JG0510, JG0509 The need for a delicate filing of the magazine hook can occur in...

Price €9.95
More
In stock

INNER BARREL SPACER SET FOR SERIES 96 [ACTIONARMY]

The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.

Price €22.95
More
In stock

DELTA SOFT BODY ARMOR - MB [8FIELDS]

Standard body armor used by Navy SEALs and Delta Force. It is equipped with two large pockets on the front and back for ballistic inserts in the standard 10x12. It is one of the more comfortable vests in its class. Extremely popular with U.S. special forces. On the front of the vest large Velcro placed on any type of ID badges, etc. Back of vest has a...

Price €36.95
More
In stock

WE M9A1 USMC Full Metal Pistol - Black

M9A1 pistol replica was made mostly of metal. Only the pistol grip cover panels are made of plastic. The pistol grip is widened and rubberized what allows for a secure grip even if the shooter has got wet hands. There is a WE logo on the pistol grip.

Price €129.95
More
In stock

JG100 A3 T3-K3 rifle replica, Airsoft

1/1 Scale High Power Assembled Electric Powered Airsoft AEG. The replica is made of metal and ABS plastic and is made by the JG company. The inner barrel, the iron aiming sights, the magazine and the trigger are made of metal while as the body, the stock and the pistol grip are made of durable ABS plastic. This combination which is also commonly practiced...

Price €199.95
More
In stock

Follow us on Facebook