The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
| Weight: | 375 g |
|---|---|
| Material: | aluminum |
| color | black |
A hop-up rubber specially created for demanding shooters. Suitable for VSR-10 replicas and clones (VSR10,MB03 ...) for Marui, WE, KJW - 1911 gas pistols, Hi Capa, SIG, KP05, KP06 ... Thanks to its innovative design, it provides the perfect position of the bb before the shot, which guarantees perfect curling and repeatability of results. The specially...
Completed Gearbox set ready to upgrade Come With Motor The spring 115 used in the gearbox will give you +/- 380 FPS - depend on the barrel and hop-up unit, used in your replica. Essential part for upgrading your Airsoft Electric Gun AEG To build a tight & durable gearbox Compatible with Tokyo Marui, JG, AGM, CM - M4/M16. 8mm Bearing Enhanced Gearbox...
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
- HIGH TORQUE long motor - Manufacturer CYMA - Fits to: series MP5, G3, M4, P90, M16, M15, SR4
A set of mounting pins for the MP5 replica's body. Manufacturer: CYMA Weight: 2g Material: aluminum Number of pieces in the set: 2 Length mm: 29 Diameter mm: 6/8.4 Gun model: MP5
Steel Cut Off Lever for Ver.II Gearbox
Guarder SP90 spring (M90), Airsoft AEG, Upgrade your AEG's fps to 290 to 300fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
Indestructible steel spring guide for V3 gearboxes is an ideal alternative if your own is damaged or you want to upgrade your replica. Thanks to the use of a bearing ensures proper spring operation. Pefrect choice if you want instal strong spring. Weight: 35 g Material: steel CAUTION!If you decide to personal installation gearbox parts as gears, pistons,...
Hop-Up rubber made from silicon. It is designed for mechanism with spring from 130 m/s.
Spring guide for version 6/7 gearbox. ULTIMATE® spring guides has steel bearings and rotatable guide. This minimizes friction when the spring is compressed, primarily effecting the rate of fire.
Weight: 5 g Material: steel
G36 Replica Pin Steel assembly pin for G36 replicas.
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Spring Guide w/Bearing v.3Ball bearing spring guide improves the operation of the entire mechanism (spring movement around its own axis).Also slightly improved velocity.
As always, upgrading AEG, Design for any 6mm Gearbox Version, Suitable for ALL Airsoft Electric Gun
SHS Original AEG Motor for Gearbox Ver.3 (Short Type) FEATURES: SHS standard motor short type. SHS original spare motor do not increase the muzzle velocity or ROF, but it Can increase the durability of your gun. Suitable for AK / G36 Airsoft Electric Gun AEG Rifle. Note: Self-assembly is required, consult expertise if needed.
| Weight: | 375 g |
|---|---|
| Material: | aluminum |
| color | black |
![MP5 PIN SET [CYMA]](https://airsoftguns.ie/18832-home_default/mp5-pin-set-cyma-.jpg)
