The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
G&G CM16 Raider M4 RIS airsoft rifle (Black)
- Fantastic starter rifle for the absolute beginner,
- Even if your not so tiny, this is still a full sized M4
|
400rd XL Size BB Speed Loader Clear or Tinted
€8.95 |
|
|
Professional 0,20g BBs - 1kg (5000rds) pellets
€12.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€4.95 |
|
Anti-fog - the anti-fog layer allows to operate in optimal conditions by removing the effects of condensation which is present whenever the temperature differences are high or during the wear of non-vented frames. Anti-scratch - improves the lenses’ durability and reduced the number of scratches. It extends the lifespan and improves the comfort or the user preventing it from scratching which can negatively influence the vision. |
Bolle Safety - Safety glasses SLAM - Clear - SLAPSI
€11.95 |
|
Design to install on Rear Retractable Stock, Sling is elastic for Close Quarter Battle use, Snap Hook Rifle Sling with snap on clip, Suitable for all rifle with Sling Swivel or hook, Both left & right handed compatible |
Elastic Bungee Snap Hook CQB Rifle Sling OD
€7.95 |
CM16 Raider-L carbine replica
CM16 Raider-L carbine replica made by G&G was made within the Combat Machine Project which goal is to deliver high class replicas in the price which can be considered economical. The Combat Machine replica characterize themselves by the highest, characteristic for the G&G company, quality of make and the operation culture as also the high class of the used materials. The main factor allowing to lower the price is the use of a high class plastic body instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass - just like the front grip, the stock or almost all plastic elements. On the other hand, the outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal.
The top RIS rail allows to attach any optical aiming sight in the place of the carrying handle. The multi-position stock allows to adjust the replica to the individual preferences of the user.
The front grip was replaced with a RIS rail set, 22mm wide each, allowing to attach a great variety of additional devices or accessories such as: a tactical flashlight, a laser target marker or a tactical grip and so on.
The replica is equipped with a reinforced V.2 Gearbox with 8mm ball bearings.
Attention: The set does not include a battery and charger.
The set includes:
- the replica
- the magazine
- 1000 pieces set of G&G 0.20g BB pellets
- cleaning rod
- manual
Battery and Charger not included (you can buy here)
| Item Weight (gram) | 2300 |
| Major Color | Black |
| Length | 785mm / 880mm (Extended) |
| Hop-up | Adjustable |
| Shooting Mode | Semi/Fully Automatic |
| Gearbox Type | 2 |
| AEG Motor | High Torque Motor (Long Type) |
| Blow Back | No |
| AEG Power Source | Up to 9.6V |
| Barrel Thread Type | Counter-Clockwise |
| Barrel Thread Diameter | 14mm |
| Magazine Capacity | 450 Rounds |
| Bullet Type | 6mm BB |
| Power (Muzzle Velocity) | 328 FPS |
| Auto Firing Rate | 900 ~ 1000 rounds per minute |
| Package Includes |
|
| Manufacturer | G&G Armament |
m
Semi- and full-automatic electric assault rifle – G36C Airsoft AEG
The SC-02 rifle airsoft gun is made of ABS and metal elements. The RIS rails, sights, magazine, barrel and some of the elements of the body are made of metal – of CNC machined aluminum to be precise. The body and the folding stock of the airsoft gun are made of ABS. The material is a durable nylon fiber, which is exactly the same, as the one used for the...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
CM007 assault rifle replica - black The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped...
CYMA M14 AEG- semi-/full-automatic electric rifles- imitation wood furniture and the metal cocking handle makes this airsoft M14 look and fell very realistic.
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
The CM16 Carbine carbine replica made by G&G was made within the Combat Machine Project which goal is to deliver high class replicas in the price which can be considered economical. The Combat Machine replica characterize themselves by the highest, characteristic for the G&G company, quality of make and the operation culture as also the high class...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
G&G CM16 Raider M4 RIS airsoft rifle (Black)
- Fantastic starter rifle for the absolute beginner,
- Even if your not so tiny, this is still a full sized M4
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
![M4 CM.612 - Black [CYMA]...](https://airsoftguns.ie/14077-home_default/m4-cm612-black-cyma-airsoft-rifle.jpg)
![M4 CM.007 Full Metal [CYMA]...](https://airsoftguns.ie/14678-home_default/m4-cm007-full-metal-cyma-ris-carbine-aeg-rifle.jpg)
![M4 CM.507 [CYMA]](https://airsoftguns.ie/11692-home_default/m4-cm507-cyma-.jpg)