On sale

Double rifle gun case 120cm airsoft - Olive

The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.

Price €39.71 Regular price €52.95
More
In stock

Double Rifle case 96cm long - Tan

Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...

Price €35.96 Regular price €47.95
More
In stock

Double Rifle case 96cm long - Black

The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.

Price €35.96 Regular price €47.95
More
Out-of-Stock

Level 3 Molle Assault Backpack, Airsoft OD

A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a  very easy and fast way thanks to...

Price €31.96 Regular price €39.95
More
In stock
All sale products
  • Banner

Trigger Assembly for VSR10 MB02, MB03 Sniper

WEL-08-009612

Trigger Assembly for VSR10

€24.95
Tax included
Quantity

 

 

 

Description

Trigger Assembly for VSR10. Suitable for WELL MB-03 series, TSD M700, Tokyo Marui VSR-10 Series, JG BAR-10 series, AGM APS2 series and other compatible airsoft bolt action sniper rifles. As always, upgrading Airsoft rifles require necessary skill & technique, consult expertise if needed. 

Product Details

WELL (Chine)
WEL-08-009612

16 other products in the same category:

Gate NanoAAB 3rd gen MOSFET active brake

NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.

Price €30.74
More
Out-of-Stock

Ball-bearing silenced Bore-Up piston head

Ball-bearing silenced Bore-Up piston head A silenced Bore-Up piston head with ball-bearing. This is a high quality, made from durable polymer silenced piston head with ball-bearing. It is designed for use with Bore-up sets.

Price €10.00
More
In stock

HOP-UP RUBBER HV50

Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.

Price €4.95
More
In stock

FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]

Completed Gearbox set ready to upgrade Come With Motor The spring 115 used in the gearbox will give you +/- 380 FPS - depend on the barrel and hop-up unit, used in your replica. Essential part for upgrading your Airsoft Electric Gun AEG To build a tight & durable gearbox Compatible with Tokyo Marui, JG, AGM, CM - M4/M16. 8mm Bearing Enhanced Gearbox...

Price €69.95
More
In stock

6,03 Steel Precision Inner Barrell - 400 mm [PPS]

6,03mm steel precision inner barrell - 400 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.

Price €26.95
More
In stock

M-147 Bottom Receiver for M4/M16 Replicas

M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle

Price €14.95
More
In stock

Deep Fire - Enlarged Metal Nozzle for MP5 AEG Series

Deep Fire Enlarged Metal Nozzle Essential part for upgrading your Airsoft AEG Tighter sealed air nozzle ensures more barrel exit muzzle velocity This Oil Lubricated Air Seal Nozzle increase the air tightness of the cylinder Direct replace the original air nozzle of Airsoft Electric Gun As always, upgrading AEG require necessary skill & technique to...

Price €4.95
More
In stock

WELL MB01, MB08, trigger assembly Sniper

WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.

Price €32.95
More
In stock

ALUMINIUM V3 CYLINDER HEAD

This high-quality aluminum cylinder head with double o-rings is highly recommended for any modifications process. Made of Aluminium (Electroplate) Weight: 10 g Material: silicon rubber, aluminum

Price €5.95
More
Out-of-Stock

Follow us on Facebook