Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 171 products.
Active filters
Set include 6pcs.
Weight: 170 g Material: metal
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, MP5-K/PDW series
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
M4 Bolt Catch Release, works on all M4 and M16 guns. Replaces your bolt catch.
SHS Piston Full Steel 7 Teeth for Gearbox V2, V3
Indestructible steel spring guide for V3 gearboxes is an ideal alternative if your own is damaged or you want to upgrade your replica. Thanks to the use of a bearing ensures proper spring operation. Pefrect choice if you want instal strong spring. Weight: 35 g Material: steel CAUTION!If you decide to personal installation gearbox parts as gears, pistons,...
Reinforced piston. High intensity polymer material. Elongated model POLYGONAL with 19 steel teeth. For SR25/R85/L85 series. Lightweight design and very robust. Compatible AEG electric guns. (Not compatible with A&K gearbox).
Steel Cut Off Lever for Ver.II Gearbox
Ball-bearing silenced Bore-Up piston head A silenced Bore-Up piston head with ball-bearing. This is a high quality, made from durable polymer silenced piston head with ball-bearing. It is designed for use with Bore-up sets.
Pack of washers, manufactured by Guarder in steel, indicated for gear adjustments. Indicated for Marui AEG. A set of gearbox shims of different diameters and thicknesses. The set includes per six 0,15mm, 0,30mm and 0,50mm diameter pads. The shims are used to balance the level of the thread-wheels in the gearbox and, what is followed by it, for the most...
SHS 6mm Steel Oil-Retaining AEG Bushing -- Fit for ALL Airsoft Electric Gun AEG 6mm Gearbox
Weight: 5 g Material: steel
As always, upgrading AEG, Design for any 6mm Gearbox Version, Suitable for ALL Airsoft Electric Gun
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
ARROW DYNAMIC AD Classic 6mm Bushing-- Full Metal Construction-- Design with 3 oil grooves to effectively increase the lubrication and wear resistance
8mm oilless bushings For any 8mm gearbox. Manufactured by SHS. Made of steel. Incredibly durable.
Upgrade trigger for G3 series. The ULTIMATE® Upgrade Series trigger is made of steel to secure the best performance and durability.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
The ULTIMATE® air nozzle have built-in rubber seal to prevent loss of compression from the nozzle. All ULTIMATE® nozzles follow TM standards. Nozzle, air, G3-A3/A4/SG-1/MC51 series