The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 30 products.
Active filters
Winter Balaclava, Perfect for Wargame, Skirmishing, Skiing, Hunting & Military/Police Purpose Use - 3 hole- color: green, OD- material: Acryl & Cotton
Replica of very well known helmet used by US Army. It's equipped with two mounting rails, designed to hold special mount for tactical accessories such as tactical flashlights, hearing protection, etc. There is also mount for night vision goggles at front of the helmet. It have a velcro tapes allowing to attach team flags, moral pads, etc. Weight: 665 g...
Universal airsoft holster suitable for most pistol frame. Component pouches for magazine, flashlight or scope storing. All pouches and holster are removable and position can be changed. Velcro strap and buckle snap make this holster fully adjustable.
Tactical Lanyard - Olive Drab A tactical lanyard made of nylon with a length of 520 mm. Features a tear-away buckle that allows for a rapid detachment.
Made of durable nylon and high impact polymer. Mounted with hard rubber cap for extra impact protection. Soft cushion pad on inner side. Adjustable velcro strap fits for various sizes.
Utility backpack made by waterproof high density Nylon material, Huge volume of capacity, able to store 2 Rifles (Sniper/Rifle), 1" molle webbing throughout the backpack, Extendable Gun Pouch is able to store up to 46"(~120cm) long rifle gun.
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft
SWAT X- Cap Knee Protective Pads Green. Made of durable nylon and high impact polymer. Developed from the input of military and SWAT leaders. Adjustable velcro strap. Perfect for all sports, outdoor activities, airsoft.
Plate Carrier Harnes - camoflage Olive - OD (green), All pouches fixed with molle system. None of them is permanently attached to the vest and may be changed if necessary.
Weight: 120 g Material: 1000D polyester Color: Olive drab Magazine pouch can hold 2x P90/UMP/MP5 magazines or many other accessories. Compatible with all MOLLE platforms. (magazines on the photo not included)
Made by high density nylon. Enhance the speed of magazine change. Keep the empty magazine for reloading later. Able to attached to any molle webbing vest, bag, duty belt or backpack. Color - Olive Drab
Replica of Knee and Elbow Pads used by US troops serving worldwide. High impact shatter resistant caps and soft foam covered by durable Nylon 1000D makes them good for ASG, paint ball, skating, installing floors or any kind of work or play where you need to protect your knees and elbows.Includes:* 2x Knee Pad* 2x Elbow Pad
Mil-Tec -Winter Balaclava, Thin fleece lining for great comfort. This hood offer Full Face Protection from head to neck - 1 hole- color: green, OD- material: Acryl & Cotton
Summer version balaclava made of thin and elastic cotton fabric. Manufactured by MFH company. Features: Three holes Color: OD green One size fits all
Summer version balaclava made of thin and elastic cotton fabric. Manufactured by MFH company. Features: Three holes Color: Black One size fits all
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Weight: 1000 g Material: 1000D polyester Color: Olive Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
