The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
AEG Rifles are available from us in Limerick & throughout Ireland. We supply & sell Cheap Airsoft Guns throughout Ireland. We can deliver your purchased products to any location in Ireland and world. All of our AEG Rifles are very realistic firearms replicas. We stock an extensive range of top quality Cheap Airsoft Guns to suit your required taste.
There are 68 products.
Active filters
Replica of the new series of AK assault rifles, these rifles are produced in many specifications that include civil or military. Receiver, receiver cover, external barrel, safety lever, rear sight base, trigger, gas port block, gas cylinder, bolt carrier, front sight base and muzzle brake are made of steel and aluminium, that made the replica is more...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
Includes Free battery and charger. Functionally equivalent to the standard Steyer AUG rifle, the ASG/JG AUG A1 military version comes in a green finish and with a 1.5x standard scope.
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
RIS rail system and an ergonomic pistol grip replica of the AK47 assault airsoft rifle that has got all of the advantages of the base model. - V.3 gearbox Please note; Battery and charger not included!!!
CM040D replica The replica is made of steel and high-quality ABS. Made of steel are silencer , dummy pipe gas, body with gunbody cover, fire selector and other minor components of metal instead of steel applications, provides much greater resistance to a large variety of damage. The magazine is made of ABS (hicap) and pistol and front grip. The hop up...
The CYMA AK74M is the latest addition to the Cyma's AK line up of AEG. The receivers are solid metal and the stock/pistol grip/hand guards are made of a durable ABS plastic. In addition to the fantastic construction of the body CYMA has added the full size side folding stock for easy storage and maneuverability. The internals are the same as the other...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Battery with charger inc.. Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body,...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
CYMA M14 AEG- semi-/full-automatic electric rifles- imitation wood furniture and the metal cocking handle makes this airsoft M14 look and fell very realistic.
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
![AK-74 CM.040 [CYMA] Full...](https://airsoftguns.ie/17625-home_default/ak-74-cm040-cyma-full-metal-steel-and-aluminium.jpg)
