- Combat Gear
- Airsoft guns
- Batteries & Chargers
- BBs 6mm pellets
- Gas - Co2 - Oil
- Spare & Upgrade parts
- AEG Parts
- Sniper parts and upgrade
- Precision Barrels & Outer
- Maintenance & Tools
- GBB Parts
- Mosfets & other
- Gift Vouchers & Deposits
- MILITARY SPRAY PAINTS
- outdoor & survival
- Knives, multitool
- ! OUTLET !
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
6,03 precision inner barrel - 510 mm
- Made of:Steel
- Weight: 120g
- Diameter: 6,03mm
- Length: 510mm
- Manufacturer: PPS Airsoft/SHS
6,03 precision inner barrel - 510 mm
The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots.
The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
16 other products in the same category:
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
TITAN V3™ Advanced Set - at once you purchase all you need to take total advantage from TITAN. It includes TITAN with ADVANCED firmware edition. The ADVANCED firmware edition offers wide variety of functions and is dedicated for those who like complex solutions. It enables access to the Statistics and TITAN World Rankings. To learn all the differences...
Description Airsoft Maintenance Kit The WE Europe Airsoft Maintenance Kit is a must have Kit for any Airsoft enthusiast. This kit includes everything an airsofter would need to keep their GBB & AEG weapons in the best condition meaning no compromising on performance. The Kit Includes: - Plastic Lubricant Oil (60ml)- Oil Remover (60ml)- Pump...
DESCRIPTION; Enlarged magazine for the Cyma 30/122/123/127 electric pistol, holds 80 bb's. Weight: 85 g Material: polymer Magazine model: hi-cap Magazine capacity: 80 BB's
Magazine is powered by rechargeable battery, which are located inside of magazine (charger and battery included). Magazine has a 2 mode AUTO (non-stop spring clocking) and Sound Control (clocking spring while gearbox is running).
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Tactical gloves used in many fields: airsoft, motorcycle, shooting training, outdoor sports, survival, trekking, etc. The good quality with protective functions like breathable, quick-dry, and hard-wearing features make this affordable prices product very popular. Weight: 150 g Material: spandex, plastic rubber, 1000D polyester
DESCRIPTION: Utility rope roll made of 100% nylon. Length: 60 mtr WEIGHT (GR): 970.00 BRAND: Fosco Industries
Set of side covers for the FAST type helmets; The set of the side covers ( cheek covers ) is designed to be mounted on the FAST type helmets in order to provide additional protection of the user’s face. The mount of the covers is possible after the application of the mounting rail set for the FAST type helmets which is available separately. Designed for:...
Fast 502 is a flashlight that can handle everything. It is ideal for tactical applications, and its made of aero grade 6061-T6 aluminum - it will not surrender even in the most difficult conditions. The torch generates light of 800 lumens, which in the hardest conditions can decide on the success of the mission. It is equipped with control on the cable,...
DESCRIPTION A replica of a submachine gun from Belgian technical thought, which thanks to an unusual cartridge has secured its place among the most problematic to classify designs. The body and the magazine are made of plastic, similar to the real firearm, while the reloading handle assembly and RIS rail barrels are made of metal. The replica is perfectly...