The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Shotgun pouch fitted with MOLLE system.
73 X 14 cm
It"s made from durable nylon replica bag. Its dimensions make it an ideal choice for transporting your shotgun. It"s accordingly stiffened to prevent any distortions and increase your comfort during transport.
It"s also equipped with adjustable shoulder strap mounted by metal carabiners. On the opened side of the cover you can also find Fastex strap designed for securing your replica. On the opposite side drain hole was placed.
Replica bag was also equipped with MOLLE system tapes, so it can be attached to your backpack or tactical vest. Side tapes enable attaching other pouches to the bag.
- Designed for shoulder carry or mounting. - Webbing on both side with detachable attachment straps for ambidextrous usage. - Four D-ring locations for attaching the shoulder sling to accommodate users' preference. - Removable retention strap with side-release buckle. - Padding around the whole scabbard to protect your shotgun. - Grommet for drainage. - Import
Taiwanese replica of STTI company is made of ABS. Metal are trigger and hammer. The gun has a standard for this class performance and is designed for people who appreciate reliability and economical gas consumption.Set includes:* USP replica* Green Gas magazine
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
FAST PJ Helmet only Cover A helmet cover by Ultimate Tactical. Made from nylon material, reinforced with RIP-STOP weave. Features a hole for a night vision goggles mount.
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
Great replica in scale 1: 1 of one of the most popular shotgun, used by civilians, police or military. The replica has been produced by CYMA specialy for the airsoft market. Just like in other replica from that producer, rifle has a reliable mechanism in this case a pump action system powered by a spring. This Shotgun is present in 2 category: low-budget...
Magazine is powered by rechargeable battery, which are located inside of magazine (charger and battery included). Charging time about 3 hours. Magazine has a 2 mode AUTO (non-stop spring clocking) and Vibro Control (overclocking of the spring starts when motion-vibration of the balls inside the magazine is detected).
Weight: 1000 g Material: 1000D polyester Color: Olive Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
Annex MI-3 is a light mask made of polyethylene by a process of injection molding. This provides high elasticity and resistance to damage. The mask features a lens fast change function that allows adapting the mask to current weather conditions without having to possess a separate mask. The visor is a polycarbonate construction with two layers, covered...
Weight: 10 g Length: 34 mm Accumulator voltage: 3 V Diameter: 16 mm WARNING! Risk of fire and burns. Do not recharge, disassemble, heat above 100C or incinerate. Do not mix fresh batteries with used Lithium Batteries or other batteries types.
Multi-Mission Pouch can hold 5.56/.223 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG), 7.62/.308 (HK417/G3/SR25/M14/AK47/FAL/SCAR-H/SSR), single or double stack pistol magazines, shotgun shells or many other accessories (flashlights, knives, multi-tools, flares, radios, grenades, glow sticks)....
Molle Pistol Belt Holster, airsoft. Tactical molle belt holster for handgun, pistol and revolver. Right handed design. Velcro strap and buckle snap made this holster fully adjustable. Universal holster fit various pistol frame size.
FAST PJ Helmet Cover A helmet cover by Ultimate Tactical. Made from nylon material, reinforced with RIP-STOP weave. Features a hole for a night vision goggles mount.
TO552 Red Dot Sight Replica - tan Theta Optics TO552 scope is powered with two AA batteries, which construction has been modeled on the holographic crosshairs. User may choose the red or green reticle. The product allows you to take action either during the day or night. Aiming point can be easly regulated vertically and horizontally. It has also several...
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
Shotgun pouch fitted with MOLLE system.
73 X 14 cm
It"s made from durable nylon replica bag. Its dimensions make it an ideal choice for transporting your shotgun. It"s accordingly stiffened to prevent any distortions and increase your comfort during transport.
It"s also equipped with adjustable shoulder strap mounted by metal carabiners. On the opened side of the cover you can also find Fastex strap designed for securing your replica. On the opposite side drain hole was placed.
Replica bag was also equipped with MOLLE system tapes, so it can be attached to your backpack or tactical vest. Side tapes enable attaching other pouches to the bag.
![ST8 NON-BLOWBACK HEAVY WEIGHT GAS PISTOL [STTI]](https://airsoftguns.ie/17033-home_default/st226-non-blowback-heavy-weight-gas-pistol-stti-.jpg)
