Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products have gained such a strong position on the airsoft market. Made entirely out of steel, with a realistic look and construction, solid gearbox, and a perfect fit.
What guarantees the authentic feel it is the fact that E&L airsoft replicas are assembled in a factory where real firearms are manufactured, which means that some external elements are identical to the original counterpart and come off the same production line.
ELMS Essential Carbine Replica
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products have gained such a strong position on the airsoft market. Made entirely out of steel, with a realistic look and construction, solid gearbox, and a perfect fit.
What guarantees the authentic feel it is the fact that E&L airsoft replicas are assembled in a factory where real firearms are manufactured, which means that some external elements are identical to the original counterpart and come off the same production line. The manufacturer made sure that the replica was as similar as possible to its original firearm counterpart.
Features of the replica:
- 100% steel construction, without the use of ZnAl elements
- a handguard and a dust cover made of solid, varnished wood
- steel parts covered with oxidation
- a pistol grip made of polymer material
- room for the battery under the dust cover
- metal hop-up chamber
- the possibility of partial disassembly of the replica, like a live firearm - without the use of tools
- magwell spacer for easy magazine replacement
- a steel mid-cap magazine with a capacity of 150 BBs
The V3 gearbox with which the E&L Essential replicas are equipped has a quick spring change system, and inside you will find such components as:
- replica
- mid-cap magazine
- oiler
- user manual
- QC certificate
Weight Material: Steel+Wood+Plastic
Weight: 3680g
Length: 660-915mm
Muzzle Velocity: ~328 FPS
Engine: electric
Manufacturer: E&L
0447A one of the most popular replicas in the world of ASG manufactured by the Chinese company [WORKS J.G.]. Due to extensive experience in the production of ASG replicas, the company [WORKS J.G.] gives us a very well-made carbine. The replica is made of aluminum alloy and ABS. The replica's body was made of high-quality plastic. [WORKS J.G.] tried to...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
The new UTR (Ultra Tactical Rifle) series with a modern design from the Double Eagle company. The main elements, such as the upper lower receivers and the handguard, are made of reinforced nylon instead of metal alloys, so the replica weighs only about 2 kg. The AX//15 handguard in the MLOK system and the AE//01 muzzle device are licensed by Aeroknox...
The CM16 Carbine carbine replica made by G&G was made within the Combat Machine Project which goal is to deliver high class replicas in the price which can be considered economical. The Combat Machine replica characterize themselves by the highest, characteristic for the G&G company, quality of make and the operation culture as also the high class...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company. Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers. Particular elements of the replica were made in a way...
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
The Arcturus company is innovating the airsoft market for a long time with new products and the desire to expand its best products with better technical solutions. The AT-AK12U-PE is an improved version of the AT-AK12-PE replica of the Russian automatic rifle of the new Arcturus PE (Performance Enhanced) series with a 2-shot mode b > and new tactical...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger