The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 195 products.
Active filters
HM0399 Polymer Stock for 416 Replicas A light, adjustable stock made of polymer, compatible with any replica equipped with a HK416 / AR15 buffer tube. The stock features a thick, rubber recoil pad and tactical sling swivels.
BIPOD Fit to AGM 002 APS2 L96 FOR SNIPER RIFLEMaterial: metalcolor: blackweight: 835 g
30 MM AIRSOFT DOT SIGHT. Classic military styled dot sight available in two different sizes – 40mm and 45mm. All versions has insensitivity settings and the illuminated dot has both windage and elevation adjustment. Please note; Red dot can come without flip side covers!
REPLACEMENT HAND GUARD FOR CYMA MP5 DOES NOT FIT SD6 OR K MODELS
Weight: 180 g Material: aluminum Color: black Length: 172 mm
Designed for use on SMGs and carbines to provide faster target acquisition and accuracy. The best for two eyes open shooting to give the operator greater zone control. It has 10 levels of brightness adjustment of the red aiming point. Fits all standard Picatinny/Weaver rails. Powered by a single CR2032 battery (not inluded). The sight comes from the...
CYMA M14 Full Metal Scope Mount Base Rail (C.40), Full alloy metal constructed. CLAW style bridge type scope mount, "See-Through" design allow use of iron sight even with mount installed, Install any red dot or scope onto this 20mm scope mount base
HM0399 Polymer Stock for 416 Replicas A light, adjustable stock made of polymer, compatible with any replica equipped with a HK416 / AR15 buffer tube. The stock features a thick, rubber recoil pad and tactical sling swivels.
An universal multi-position stock for the AK type replicas is based on the M4 type replicas stock. The stock’s pipe is made of metal ( ZnAl ) and the tactical sling attachment point whiles as, on the other hand, the stock’s body is made of durable plastic. The stock’s foot is equipped with a porous surface thanks to which it is very stable. Dedicated to...
CYMA Accessory Series (C.07)- Full Metal Constructed Top Rail Integrated System- Replacement of your AK Gas Tube- Provide 6.5 inch Top Rail for any accessories attachment- For AK74 Series Airsoft Electric Rifle AEG
- Full metal, adjustable - Fits 20mm weaver rails and comes with front fitting for WELL L96 sniper rifles - This bipod fits MB01, MB01/08, MB08
Scope Claw Mount for MP5/G3 and most HK Style clones. Scope mount has double Picatinny rails. Perfect for all varieties of scope, tactical flashlight, and laser. Weight: 150 g Material: aluminum Color: black Length: 133 mm
Multi-Function Automatic Airsoft Target System, Net and Support, Mechanical Automatic System, 3 Round Plastic Target and Paper Target.
Diameter lens : 21 mm Magnification : 8x Field of view : 131m/1000m Eye relief : 2,6 mm Construction of prisms : Schmidt-Pecha
Allows mounting optics to AK rifles. Replaces existing AK receiver dust cover. Fits most AEG AK pattern rifles, but it may require additional matching.WARNING! It does not match the CYMA 045 replicas, it is too long for them.Does not match - CM.045, CM.045A, CM.045C. Weight: 290 g Color: black Material: aluminum, steel Length: 290 mm Replica Model: AK...
Aluminiu heavy body handcuffs with double locking mechanism. two keys included weight: 235g
ASG replica shooting target, equipped with a BB trap and replaceable targets.- mesh BB trap stops the BBs and prevents ricochets- 5 interchangeable paper targets included- two stamps with silhouette and spot pattern for self-made targetsTechnical data:- BB trap size: 190 x 260 x 280 mm- Target size: 180 x 200 mm- Weight: 300 g HFC or ASG - depending from...
Compatibility: For Tokyo Marui, Matrix, G&P and other similar Airsoft M4/M16 Series Airsoft AEG Rifles with retractable stock Color:OD Note: Does not house batteries for rear wired AEG Rifles Note: Markings on Stock made be different.
Bi-pod for the MB06D Airsoft Gun. Foldable bi-pod with adjustable legs for different heights.
US Special Force Crane Stock for M4/M16 Series AEG. Store up to 9.6v twin-stick type battery (mini type).Matt Black Finish look very realistic Weight(Gram): 400 Doesn't include stock tube
![Hand Guard for MP5 [CYMA] +...](https://airsoftguns.ie/17261-home_default/hand-guard-for-mp5-cyma-grip.jpg)
